Search results

  1. R

    Windlass

    I have a Quick 1000 Windlass. The anchor will go down but not up. I bought a new switch but still does not work. Before I spend a $130 bucks on a solenoid can anyone tell me how to bench test or jump it to see if the motor works going up? I took all the terminals off and cleaned them. Any...
  2. R

    New to me 2005 Albin 28TE flush deck

    Looking for so many answers to so many new questions. If anyone has any information please let me know. All answers are appreciated. 1. The boat has a center fish box. This really is a double box. When empty you can use the hydraulic lift to lift up towards the bow. You access the...
  3. R

    Zinc Anodes

    I have a 1998 Wellcraft 24ft coastal with a1998 Johnson 225 HP E225TXECS. 2 questions ???? Can anyone direct me to where the zincs would be and how many there are. I located 2 so far 1 on the transom bracket another on the front (or really in the middle) of the lower unit. 2. I went on line...
  4. R

    Broken screws in the transom

    1998 Wellcraft Coastal both trim tabs have broken screws on them. On the port side which is completely off we have 6 screw holes. 3 screws are out and 3 are broken off just under the fiberglass where you cannot see of get a grip on them. 2 part question. 1. what is the best way to remove...
  5. R

    Prop and RPM question

    I have a 1998 Wellcraft Coastal with a 225 Johnson. My aluminum prop is 15 1/2 x 15. Bought the boat 3-4 years ago ran great. Maiden voyage the other day went to plane as normal was doing 30-31 mph at 4900 rpm's. After slowing down for a bridge the rpm's would only go to 4000 and the speed...
  6. R

    225 Evinrude Ocean Pro lower unit oil

    I have 1998 225 Evinrude Ocean Pro. Last year before going back in the water I had it professionally serviced. I had new plugs new water pump the whole job. I just went to change my lower unit oil and it is all murky brown. Can anyone give any advise? Paid this guy a lot of money. Don
  7. R

    Macerator pumps

    Hi, Can anyone tell me if I can downsize the intake and out put on a macerator pump with doing any damage to it? I have a fish box with a 3/4 inch hose coming out. It was connected to a bilge pump (that wasn't working when I bought it) and the out put going through a thru hull fitting is 3/4...
  8. R

    1998 Welcraft coastal

    Would anybody be able to tell me the original pump for the in deck fish box? When I purchased the boat from a dealer the pump that was on it an Attwood Aerator 500 was frozen. The hoses in the box to the pump and from the pump to the bail out are 3/4 inch. If you don't know the original any...
  9. R

    Bottom Paint

    I have a used 1998 24' Wellcraft purchased last fall. Since I don't know what bottom paint was on the boat what would be the best way to proceed. The boat was power washed when she came out of the water and looks like a light sanding would do. Any suggestions on using a primer or what kind of...
  10. R

    1998 Evinrude 225hp

    Hi All, Can anyone tell me whats involved with winterizing a 1998 v6 225 HP Evinrude. I know I have to fog the engine but don't know how. Never had an outboard before. Thanks in advance Don
Top