Search results

  1. B

    Volvo 4.3L GXI-F Cam/Crank not lining up

    Summery of my issues 1) Do not buy cheap amazon sensors they don't work 2) the crank and cam sensor not lining up was do to improper distributor placement 3# injectors having no fuel coming out was map sensor giving ECM incorrect values. Engine is now fixed and running strong, thanks for all...
  2. B

    Volvo 4.3L GXI-F Cam/Crank not lining up

    You are correct sir. new MAP sensor and it fired right up! now to get it all put back together for the weekend.
  3. B

    Volvo 4.3L GXI-F Cam/Crank not lining up

    So the only code i get now is a block pressure low code which i believe is water pressure, The injectors are getting voltage and if i manually operate them with the computer they spray fuel. they spray very very minimal fuel when the engine is trying to run or is running. good oil pressure and...
  4. B

    Volvo 4.3L GXI-F Cam/Crank not lining up

    It was 40-43 psi i think, i also put a fuel injector flusher to the fuel rail and tried to run it that way. about to put the computer back on it today.
  5. B

    Volvo 4.3L GXI-F Cam/Crank not lining up

    Update, Got the ignition system lined up and operating but for some reason now the injectors are not firing. i can put gas down the intake and it will run until that runs out, if I keep adding fuel it will keep running. it has good fuel pressure and i cleaned and flow tested all the injectors. I...
  6. B

    Volvo 4.3L GXI-F Cam/Crank not lining up

    I have a 2006 volvo penta 4.3l v6 gxi-f that was in a freeze and i replaced the cyl heads and exhaust manifolds. it ran perfect before this just was leaking water inside the boat (not in the oil). Now it wont start, i thought it was the distributor being miss aliened or off a tooth but ive tried...
Top