Search results

  1. B

    Yamaha Fuel Connector Problem

    I am not mechanically inclined at all. I pulled the end of my fuel line out of the motor and the little brass piece that sits in the motor end stayed on the fuel line end when I pulled out. I have no idea if anything else fell out when that happened. I pushed the sliver button and with some...
  2. B

    84 evinrude 140 v4. Fast question. Gear oil

    I am out on the road and want to purchase some bulk lower unit gear oil for my 84 v4 140. What gear oil do I need?
  3. B

    Problem 2002 90TLRA Boggy after 1/4 Throttle. Please help ASAP

    Go to use my 90TLRA this weekend (has not been used since this time last year). Starts and idles fine but as soon as I get to 1/4 throttle it boggs and sounds like its missing on one of the plugs. Plugs look fine, gas is new, hose and tank are new last year. I am heading down today to get a new...
  4. B

    Honda BF50 - 1999 - starter issues

    I have a 1999 bf50. Had the starter solenoid replaced 2 years ago and the starter worked perfectly since. That is until this year. Pulled the boat out, serviced everything, dropped the newly charged battery in and went to start the motor. It made a quiet "whirring" noise and then 4 audible...
  5. B

    2002 Yamaha 90tlra oil seal replacement

    I recently purchased a 90tlra off a friend. Before I put it in the water I noticed that some oil was leaking out by the prop. A buddy told me to replace both oil seals on the prop shaft. They were easy enough to get at and pick out and there was debris behind them (weeds and such). When the...
  6. B

    Year of my Merc Tower of Power ???

    I recently purchased a 18 ft Lund Alaskan with a 115 merc tower of power. The motor is running great but its to heavy and 2 much motor for my fishing needs. I cant seem to find a guide to pull the year from the serial #.. I live in Canada, Not sure if that makes a difference or not. S/N is...
  7. B

    Trolling Motor for my 24' pontoon boat

    I was wondering if anyone could help me pick out an ideal trolling motor for my 24ft pontoon boat. I am not sure how much thrust I should have for a boat that size. I am interested in the gps electronic anchor ones they have out these days. I also think I would rather have a remote control than...
  8. B

    Fishing Rod Holders

    I have a 24' Tahoe fish and fun with square railing. Im not sure of the exact dimentions of the railing but I want to know of a good fishing rod holder for them. I would like to purchase about 5 of them. If anyone on here has any advice for me it would be greatly appreciated.
  9. B

    Evinrude Fuel Pump 5007423 HELP

    Ok If someone can please help me. I had a treat earlier and I tracked my problem all the way to the fuel pump. My 1984 Evinrude pump is a no wire pump. I didnt know I had to order the harness 174710 with it and no one has it in stock anywhere in my province. I called one place and they asked me...
  10. B

    1992 Sea-Doo GTS

    Hello I just wanted to know if there is anything I should check. I have not used my sea-doo for a couple seasons and this year I went to get it ready for the lake and I noticed lots of oil in the bottom. I cleaned it all out and have no idea where its coming from. I live in Northern Canada with...
  11. B

    Prop size and pitch best suited for my 24' Pontoon?

    Hello. I recently purchased a new 24' tahoe fish and fun pontoon boat. I put a 1984 Evinrude 140 (E140TLCR) on it for this season while I look for a good deal on a 115 4-stroke yammy. The pitch on the 140 Evinrude is 17. I do not have my tack set up on the dash as I dont want to spend any money...
  12. B

    Wrong fuel connector?

    I need some help. Is it possible that my 84 140 evinrude could be running like **** because of a wrong fuel connector at the motor? I had my motor installed at a mercury dealer and did not take him any connectors. When I looked at the fuel connector to the motor last night it looks different...
  13. B

    1984 Evinrude 140 Help

    I am happy to have found such an awesome site! Here is my problem. My Dad has always had problems with the idle on our 1984 evinrude 140 from the day he purchased it brand new. We were always told that you have to warm the old 2 strokes up really good but I dont think it ever sat and ideld with...
Top