Search results

  1. B

    Johnson 9.9HP Throttle Setting

    I have used a fishing line to pull throttle arm gently. I was able to adjust it with the nuts as you can see in the video but I proved myself why we need idle circuit in the carburetor as throttle arm and butterfly plate resolution is not enough to have stable idling speed. I cleaned my carb...
  2. B

    Johnson 9.9HP Throttle Setting

    here is the video of my motor
  3. B

    Johnson 9.9HP Throttle Setting

    When i had cleaned my carburetor i did not open the plug. Maybe i should open it and clean the holes then. I am talking about the big al plug.
  4. B

    Johnson 9.9HP Throttle Setting

    Thank you, So what you mean is that: Even in a condition where the cam does not touch the carburetor roller which means there is no trigger for the throttle plate in the carburetor, motor still should run as throttle plate (butterfly) is designed with the holes allowing fuel/oil/air mixture...
  5. B

    Johnson 9.9HP Throttle Setting

    thank you for the response, may I also ask you the same question: Should engine still run at idle speed while the cam does not touch the carb roller? I checked the cam and it seems like when it starts to touch the roller it meets the small mark on the cam. But in my case my engine does not get...
  6. B

    Johnson 9.9HP Throttle Setting

    Thank you for the swift response. My motor can not keep running at idle although its warmed up if the throttle linkage / roller was not pushed gently. So if I didn't have remote control, i could have the same problem. thank you, Erhan
  7. B

    Johnson 9.9HP Throttle Setting

    Hello, I have 1979 Johnson 9.9HP. I installed new water pump, impeller, fuel pump, fuel lines, spark plugs. Carburetor cleaned with repair kit. All seems working fine. I have single handle throttle. I can not start the engine in neutral. If I push throttle arm, it goes in shift and if i push...
Top