Search results

  1. S

    Cold water coming from pee tube

    Hi just put a new water impeller in a 150 evenrude 1985 pees good but water is cold , put a new temp. gauge in and it stays at 120 but the heads are pretty warm but can hold my hand on them should I take the heads off to check anything? Hope not will have to order new gaskets.Thanks
  2. S

    Old Outboards ????

    I would go on Craig’s list ,EBay,or market place and see what they are asking for compatibility product.They are worth what ever you can get and how quick you want to sell
  3. S

    Bracket to hold controle cable in place

    I have a 1985 150 evenrude anyone know what the bracket to hold the throttle and shift cable in place ? Purchased this boat and someone before me had torn everything loose and parts are missing . Thanks
  4. S

    150 Xp changing from vro to straight fuel pump

    Thanks so much for the input
  5. S

    150 Xp changing from vro to straight fuel pump

    Putting on the double pump I ordered. On the left side of the motor where the vro was located there is a hard tube about 8 in. Long with fuel lines that feeds the carbs and these smaller lines I guess I need to hook them up also then ,thanks foe the feed back the person who had the boat before...
  6. S

    150 Xp changing from vro to straight fuel pump

    I am changing the vro on my 150 Xp evenrude 1988 and on the fuel lines going to carbs there are 2 lines one is very small and the other looks to be fuel line what do I need to do with the small lines and are they for supplying the oil when using the vro system thanks
  7. S

    VRO to standard fuel pump

    I have a1988 150 XP evenrude and want to replace the VRO with standard fuel pump all I can find in the 150 class is a 155 cross fire will this fit my XP model and how is it hooked up ? Help please
  8. S

    1988 150 XP evenrude

    I have a 1988 150 XP evenrude outboard it has had the vro removed so I’m replacing it with straight fuel pump. It has no fire on plugs and the shift and throttle were taken apart and some of it is missing so I’m replacing it with a new control box and a new steering system. When that’s all...
  9. S

    Motor compression test

    I have a 1988 150 XP it has 82 psi on 5 cylinders and 70 on the other is this acceptable for this age motor? This is cold engine pressure
  10. S

    I have a 1988 evenrude 150 XP it has 82 psi on 5 cylinders and 70 on one is that acceptable for...

    I have a 1988 evenrude 150 XP it has 82 psi on 5 cylinders and 70 on one is that acceptable for thic age of motor? That is cold test
Top