Search results

  1. Crazy_Pilot

    '89 Arriva 2050 Restoration

    Nah, still got lots of fun left. I've only just started ripping the bow seats apart, still have to pull out the wood strips buried in the chines, lots of grinding.... What I really need is a vacation where I can just work on this thing for a few straight days.
  2. Crazy_Pilot

    '89 Arriva 2050 Restoration

    Well another scorching hot weekend so what's better than getting suited up and turning fiberglass into dust? The tent turns into a greenhouse when the sun hits so I put the garden hose on top on a mist setting. Keeping it wet helped massively. The philosophy when this boat was build seems to...
  3. Crazy_Pilot

    '89 Arriva 2050 Restoration

    I've been thinking about those. Some of the tabbing in my boat is just insanely thick, a good 3/8-1/2 inch in areas. I hate the idea of leaving it there because it's so poorly done, but at the same time remembering that it's survived 30+ years and will take me ages to remove. If I could find...
  4. Crazy_Pilot

    '89 Arriva 2050 Restoration

    Agreed. They didn't even use clear boards, the spot where they keyed the ski locker bulkhead into the stringer went through a massive knot in the stringer and at first I was confused when a big chunk of round wood fell out. I'll be using 3/4 ply for the stringers when it goes back together.
  5. Crazy_Pilot

    '89 Arriva 2050 Restoration

    I dissected a section of removed stringer for fun. It appears that solid boards were in style when this boat was made. My nose says it's some variety of cedar but I'm not a woodworker so that's just a guess. The glass was vaguely bonded on one face and not at all on the other.
  6. Crazy_Pilot

    '89 Arriva 2050 Restoration

    Already on the way. My woodworking neighbour lent me his separator, I have a 20 ft hose arriving today and put a switched extension cord together over the weekend. So far I've been doing the boot on the hose dance and shooting the dust into and while that gets 90% there's still the really light...
  7. Crazy_Pilot

    1989 Sea Ray 200 BR Interior rebuild and new layout

    Make those service cutouts as big as you can. My boat had a similar setup but the openings to service the engine were around 12x12 which I still found limiting for anything more than winterizing. You can never have enough access. As part of my rebuild I intend to almost completely remove the...
  8. Crazy_Pilot

    '89 Arriva 2050 Restoration

    This week's update: More of the same. Life with a 2 year old means I only have a couple hours a week to spend on the boat when she's napping, and this Sunday was 45 degrees C with the humidex (~113 Freedom degrees) so no chance I was going to kill myself that badly. I did get the rest of the...
  9. Crazy_Pilot

    '89 Arriva 2050 Restoration

    I mean what's not to like about putting on a tyvek suit, respirator, earmuffs, gloves and then spending an afternoon turning a boat into hazardous dust on a hot summer day?
  10. Crazy_Pilot

    '89 Arriva 2050 Restoration

    I don't see too much need for tabs but it's worth keeping the option open. They might be challenging to install on my hull though - the stern has the two pods under the swim platform which limits the height for the trim actuators. Never really gave it much thought.
  11. Crazy_Pilot

    '89 Arriva 2050 Restoration

    Another weekend of demo and cleaning. I've started grinding the old transom tabbing away and planning for the new wood core. The original wood only spanned between the stringers and was obviously good enough for 35 years but it seems underbuilt compared to other examples I've seen here, so I'm...
  12. Crazy_Pilot

    '89 Arriva 2050 Restoration

    Ha, true enough. The staples used to hold the floor down might have accelerated things a little - as they rusted they acted as channels for moisture to wick down into the stringers - but you're right, once moisture gets that far there are bigger problems than what the staples are made of.
  13. Crazy_Pilot

    '89 Arriva 2050 Restoration

    Drive removal went off without a hitch, except that the steering cable nut galled to the threads of the actuator tube and tore those up a little. That's future me's problem. Transom skin removed. The transom core on this boat is tiny, it only spans between the stringers. Before I pulled the...
  14. Crazy_Pilot

    '89 Arriva 2050 Restoration

    I built a gantry in my garage using doubled up Unistrut, bolted to a third strut sandwiching the trusses and supported by foundation posts on both sides. Worked a treat! Took a moment with some degreaser to get everything tidied up inside. First cuts into the glass on the stringers. No...
  15. Crazy_Pilot

    '89 Arriva 2050 Restoration

    A tale as old as time. Man see boat, man buy boat, man discover soft floor (6 years later), man ignore wife suggestion to buy new boat, man get itchy arms. Back in 2018 we picked up an Arriva 2050 with a 5L and have enjoyed it well since then. It's had a couple issues but just normal boat...
  16. Crazy_Pilot

    Can electrical power be pulled from a 25hp Merc outboard?

    His is missing everything past the grey connector - regulator, fuse, red wire. I saw the mounting points on the intake manifold and figured they might be for the power out components but wanted to confirm. Thanks for the picture, it's a big help to see what's needed. I think with that in mind...
  17. Crazy_Pilot

    Can electrical power be pulled from a 25hp Merc outboard?

    Oh for sure, electric start is an option and you can see where the starter would go. I think the harness would need to be added for it though. The stator is easy to see and there are a few blanked off connectors but without a diagram I don't know which would be power out. I think there's a...
  18. Crazy_Pilot

    Can electrical power be pulled from a 25hp Merc outboard?

    We bought my father in law a new fish finder this summer, a Garmin Striker 9SV. It's a big upgrade from his previous little Hummingbird. Problem is, the little 7 amp hour battery he used for that one will only run the Garmin for a few hours. It might have lost some capacity already but he'll...
  19. Crazy_Pilot

    '89 Arriva instrument panel overhaul

    One of my pre-summer projects this year is rebuilding the panel on the Arriva we bought last year. The original switches are badly faded and UV damaged, the gauges are completely crazed and look like crap, and the radio is one of those generic Pioneer units everyone installed in their 1998 Honda...
  20. Crazy_Pilot

    Picture request - Faria Beede Kronos gauges at night

    Does anyone have a picture of the Faria Beede Kronos instruments lit up at night that they would be willing to share? I?m doing an overhaul of the panel on my Arriva this winter/early spring ? new gauges, switches, and possibly re-making the whole dash assembly out of something other than that...
Top