Search results

  1. sphelps

    The Tin Mule Resto

    A bit of color .... Next up finish white paint on the bottom .. I made a make shift return air plenum for the window unit so I could keep cool air flowing.. This time The humidity stayed below 50% while I was painting ..
  2. sphelps

    The Tin Mule Resto

    Took a while to get it dry but managed to get 2 coats of epoxy primer on .. First coat went on perfect .. Coat 2 had a few issues but not bad .. By the time I was done the humidity in the garage was at 90% .. I think thats what got me on coat 2 ... I think Im gunna try and hook up outside air...
  3. sphelps

    The Tin Mule Resto

    Thanks guys I am starting to feel better .. Spent a little time this weekend on prep work .. Fiber wheeled around all the rivets and got the rest of the silly cone off the hull .. That was a chore ! I need to do the final sanding .. What grit would y'all recommend ? I'm thinking 120 so the...
  4. sphelps

    1950's Wagemaker Wolverine wooden boat restoration ...

    Spent Friday and Saturday camping not to far from home . After getting back and cleaning the camper and such I got the boys to help take the speeditwin off the WM and put it in the test tank I just put together out of one of those 275 gallon totes .. Its a bit high but still works good ..I may...
  5. sphelps

    The Tin Mule Resto

    The hull looks like a beer can thats been washed around on the beach for so long that the paints wore off . lol.. Notice the trailer roller ? I assume its the original gator rollers . That and the funny rear bunk tilt mechanism.. I,ve never seen a trailer with that on there ... Over all trailer...
  6. sphelps

    Racing stripes

    The Admiral wants stripes on her new to her RT Durango . Thinking on a matte black dbl center stripe . Anyone ever put a large vinyl stripe kit on before . I haven't ordered one yet . Just wondering how tuff a job it will be .. Here is the subject .. And yes it's a blast to drive . :)
  7. sphelps

    springbok 14 ft aluminum decking replacement

  8. sphelps

    Help Identify Boat Manfacturer - old 14ft V-Hull Aluminum

    Bobby , when you figure out let me know .. I think were in the same boat so to speak ..lol ! Duracraft was gunna be my guess .. Yours looks older model than mine but willing to bet they are from the same manufacture ...
  9. sphelps

    The Tin Mule Resto

    I think i got about 99% of the crud off now ..Did some preliminary sanding also .. GA , what do you think on this deck material .. Its aluminum and relatively light weight .. I did the bare foot in the hot sun test and it got warm but not to bad really ... It,s one of those wipe off grids...
  10. sphelps

    The Tin Mule Resto

    Hope everyone is having a blessed Easter ! Staying at home I did get a little done on the boat .. I picked up a sheet of MG plywood Friday .. Had enough to do the transom and the seats .. Still need to do some trimming and sanding before the epoxy goes on ... I made the transom pieces just a...
  11. sphelps

    The Tin Mule Resto

    I would like to make the outside piece about a inch or 2 larger I think ..That would allow for a little more sealant around the lower mounting holes ..
  12. sphelps

    The Tin Mule Resto

    Working the night shift so got a few hours to kill during the day before work .. Been piddling around a bit .. Pressure washed it out .. I couldnt have done this with the same size glass boat . LOL! Also took the old transom off .. Good grief at all the fasteners . So should I reuse the...
  13. sphelps

    The Tin Mule Resto

    Also been thinking about the new transom .. Seems like there's gunna be a bunch of holes when the old transom comes off .. I would like to leave the wood natural stained and sealed .. Is it best to use plywood or can i use a dimensional lumber ? My 22.5 hp will probably be the largest hp motor...
  14. sphelps

    The Tin Mule Resto

    Need a plug .. I found the right size and thread .. but don't these drains need a plug with some sort of flange and washer to keep them from leaking ? I could put some Teflon tape on the brass plug I guess .. The po squirted silly cone on every stinking seam on the boat .. I want to remove...
  15. sphelps

    Removing king pin from Yammy golf cart .

    Update : Got a bigger hammer and got the other one out ... Everything back together now .. The new KP's tightened things up pretty well up front .. Had to get a new charger .. Also new LED lights ,seatcovers , and back armrest /cupholders ... I'm still gunna either replace or try the easy...
  16. sphelps

    1953 Wagemaker Wolverine

    Here is a brochure I have ..
  17. sphelps

    Random

  18. sphelps

    1962 Merc 450 restoration ..

    Sorry no posting lately .. Been super busy doing other stuff but did manage to get a stand built for it .. Also working on adding some counter top work space to try and keep things organized as best I can .. A little bigger than the speeditwin but not too much .. I wonder what each one weighs ...
  19. sphelps

    Glasspar Lido Deck Questions

    Yep , the Tee Nee trailers are the sought after type . Yours looks like a little later model year but the tear drop fenders and closed in winch stand are there .. If I’m seeing right it has the metal die cast tee Nee emblem on the winch stand .. If it is , guard it with your life ..LOL! Mine...
  20. sphelps

    1950's Wagemaker Wolverine wooden boat restoration ...

    Thanks guys ..She was 82 years young .. On an up beat note I registered for the Dora show in March .. Always a great time down there .. The Wagemaker is really The Admirals boat so she chose the name for her .. She wanted to name it after her dog . I'm not about to argue so the "Miss Lily" it...
Top