Search results

  1. JimS123

    Sad Day Yesterday

    All the oils are changed, the water is drained, the upholstery is polished, the hulls are waxed, the wheel bearings are repacked, the axles are raised and the rubber is off the floor, the covers are on, the batteries are charged and the gas tanks are full and stabilized. They are all snug as a...
  2. JimS123

    Carburetor choke not opening?

    With a cold engine, the plate should be closed. As it warms up the plate should gradually open. When fully warmed up the plate should be wide open whether its at idle or WOT. 35 years with a 3.0 and the only work I ever did on the carb was to replace the choke spring. You should do that too...
  3. JimS123

    New pistol for carry

    Pardon me for being late in the game as well, but I rarely view this sub-forum and site problems of late have kept me off-line. If you asked me the question 20 years ago, I would have recommended a wheel gun. Although a 2” Chief’s Special would have been my first choice, I could never get...
  4. JimS123

    Mercruiser 5.0 TKS vs 4.3 MPI

    If you want to hear a fresh young mechanic say "huh?", tell him you need him to dress your points. I suspect that carburetor maintenance will one day parallel the advent of electronic ignition. Its fine if you have the time, patience and knowledge to do your own work, but for those that rely...
  5. JimS123

    Outboard motor steel 6 gallon gas tank rust

    You can't get rid of the rust, but you can add to the tank's longevity. Inspect the bottom of the tank to be sure there is no rust starting to come through. If the bottom is OK, the tank is still OK. Remove the gauge assembly from the top of the tank. Drain all but about a gallon of gas...
  6. JimS123

    Tee Nee Flatbed tilt trailers of the 70's

    The back 3 feet of certain mahogany classic boats are often cut off and made into a bar for someone's rec room. Naturally, the boats are not particularly collectible by themselves. The bottom line is that after selling the bar and scrapping or parting out the engine, windshield, et. al, the...
  7. JimS123

    Tee Nee Flatbed tilt trailers of the 70's

    Holsclaw used coil springs exclusively. The TeeNees that I personally owned all had leaf springs. Those were from the 70's and 80's.
  8. JimS123

    Tee Nee Flatbed tilt trailers of the 70's

    I have been a TeeNee fan since the 1960's. I also have a huge collection of boat related literature going back to the 1950's. I distinctly remember that TeeNee did indeed sell utility trailers. They had a fold-out insert in the boat trailer catalog describing the utilities. I kept that...
  9. JimS123

    speedo gauge wrapped around.

    Never heard of a novo penta speedo?? Maybe you need to provide a part number. Are you saying that the pitot tube speedo cable wrapped around the propeller? If it happened when trailering, maybe you need to raise the outdrive and put it in reverse so the prop doesn't spin.
  10. JimS123

    Two Trolling motor on one Inflatable boat

    The OP never said gas motors, single OR dual. When someone says "trolling motor" they usually mean electric. He DID say "faster". That doesn't compute with fishing. The OP needs to clarify before we make more suggestions. (OMG, twin mercs on a rubber boat! That's one for the record books.)
  11. JimS123

    Two Trolling motor on one Inflatable boat

    If I read the question correctly, the OP simply wants his boat to go faster. In that case the 2-stroke suggestion is the best option. Along those lines, the battery requirements for 2 electric motors in itself will kill the idea. If all he wants to do is fishing trolling, then a bigger...
  12. JimS123

    Mercruiser 5.0 TKS vs 4.3 MPI

    We sold our 3.0 Mercruiser last year after having owned it for 35 years. About 1250 hours on the clock. Maintenance was by the book and we used E10 for however many years it was available. The carb was adjusted as necessary and I replaced the choke spring once, but the carb was never rebuilt...
  13. JimS123

    Old girl for sale. Need advice

    Midwest Chapter of AOMCI is in Elkhorn, WI. Looks like a half hour drive. Web Site is: https://www.aomcimidwest.org/ Looks like they are having a swap meet day after tomorrow. How lucky can ya get....LOL.
  14. JimS123

    Old girl for sale. Need advice

    Beautiful old boat. Your Dad took real nice care of it. I would be proud to have my Dad's boat. My first inclination would be to contact the Antique Classic Boat Society or the Antique Outboard Motor Club. Those are 2 sources of potential buyers. Look up ACBS.org and AOMCI.org. and see if...
  15. JimS123

    2020 Starcraft Marine MDX Surf 231 IO Surf

    I don't speak from personal experience since I don't own one and never would consider it. My opinion is purely based on what I've read in the boat rags, plus never having actually seen one on the water. The first one I saw was at the Miami boat show. Later shows in my home area turned up not...
  16. JimS123

    2020 Starcraft Marine MDX Surf 231 IO Surf

    We all have opinions and we all have likes and dislikes. That's why they make so many different styles and sizes because they want to attract the biggest market possible. I'm going to apologize ahead of time in case you buy the boat. * The bimini is too too small. It will be a waste of time...
  17. JimS123

    Replacing Porch Post

    Replace with cedar 4x4s. Coat with Flood UV every 3 years. If you want even less maintenance, cover them with vinyl wraps.
  18. JimS123

    New boat question

    Yeah, muskys are our thing too. We use single or double jointed pikie minnows and run 1.8 - 2.0 mph. Any faster than that and the lure action isn't right. I used to run a 9.9 on my past boats, but currently my 5.0 Sail Pro pushes our SeaRay at about 6.0 mph at 3/4 throttle.
  19. JimS123

    Fulton XLT 10.0 Inquiry

    The hook clippy part is detachable. Note the ribbed button. I guess it can be replaced if it wears out. Anywhoot, if your strap hook is on the large side and you are a bit rambunctious in popping it out, the hooky part will fall off. Fortunately, it floats and is easily retrievable. The 2...
  20. JimS123

    Power Trailer Winches

    Just curious about y'all's opinions. Which brand is the best? I have been switching from one boat to the other (don't use 2 boats at the same time), but I thought I might buy a second one just to minimize the hassle.
Top