Search results

  1. S

    6 HP evinrude no spark

    I have a 6 HP evinrude model no. e6rcud with no spark. I tested the kill switch to make sure it was not shorted and all is good. I was talking to a guy that "knows boats" and he told me to replace the power pack and timer base as a set because if one is bad the other maybe real close. Is this...
  2. S

    Prop size issues

    I have a 1972 16' starcraft holiday v-hull aluminum runabout with a 1995 70hp evinrude on it. The boat has a ton of power coming out of the hole but seems to top out quickly. I bought the motor used and I used the prop that came with it. The boat the motor was on was larger and alot heavier...
  3. S

    spark problems 95 70hp evinrude

    The boat won't restart when hot and runs a little chuncky at an idle. I am unable to duplicate problem on the muffs. Compression is good (125 psi) all cylinders. Rebuilt carbs and changed plugs. I brought it to a shop and they told me I need a power pack. They said that if I am changing the...
  4. S

    95 70hp Evinrude weak spark all cylinders

    Here is my problem, I bought a used 1995 70hp evinrude outboard and from day one it seems to have a rough idle. It will start right up when cold and when under way it will cruise with no problem as long as you want. Once you shut it off it almost never starts back up. It acts like it is...
  5. S

    Power trim and tilt upgrade.

    I have a question, can you put power trim and tilt on a motor that did not come with it? I have a 1985 evinrude 70hp and want to have power trim without dishing out $600 for that one by CMC. If any one can help me with this that would be great. Thanks
  6. S

    1984 evinrude 70hp

    I have a 84 70hp evinrude . I recentaly replaced head gasket, spark plugs , and one coil . the boat runs decent and low rpms but when I give it full throttle it falls on its face . When I decrease the throttle it comes back . I have checked the compression and I have 115 lbs across the board ...
Top