Search results

  1. D

    Help with transom soft spot

    I have a 1992 Crownline 183br. The transom seems to be a 3 piece design. The center where the out drive mounts is about 3 inches thick, while the sides are only about 3/4 inch thick. I have a soft spot on one of the sides above the floor and was wondering what I could to to repair it. This...
  2. D

    Need advice on how to fix.....

    I have a 92 Crownline and have been chasing a water leak. I believe it is comming from the swim ladder mounted on the bottom of the boat. The problem is I cannot get to the nuts on the other side as they are not accessible. Several of the 6 screws just turn and I am sure they are not water...
  3. D

    1992 Crownline 182 br swim ladder mount

    I am fairly certain the ladder is leaking, but I can not get the screws removed( they just spin). The ladder is mounted underneath the boat on one of the platform extensions and I can not see what the screws are going into. Are the usually nuts and bolts or just screwed into the glass? If...
  4. D

    1992 Mercruiser 4.3 vibration under load at 1500 rpm

    I have a 1992 Mercruiser 4.3 with alpha 1 gen II outdrive and 3 blade stainless prop. It has a vibration on slow acceleration from around 1500 to 1700 rpm's. It only happens when in gear and at slow acceleration. Any suggestions on where to start?? It also stalls when accelerating going in...
  5. D

    1992 Crownline 182 water comming in boat

    I have a 1992 Crownline 182 that is taking in water. I have checked the rub rail around the swim platform and tightened the screws. The bellows all look good,the exhaust manifolds are showing no signs of leaks,and the transom shows no sign of leaking around the outdrive. The transom hooks do...
Top