Search results

  1. S

    Boat Cover Material

    Need opinions on Topgun fabric vs. Sunbrella fabric for mooring covers, biminis, etc. I got samples of both but want to get peoples opinions on the pros and cons of each material.<br /><br />thanks<br />eric
  2. S

    Sizing Battery Cable

    I am setting up the batteries in my project boat. I have access to alot of 2 AWG battery cable and for monetary reasons would like to use it. The batteries will be positioned right next to the engines. Is 2 AWG heavy enough cable for the connection from the batteries to the starters? I am...
  3. S

    Dual Helm Steering Setup

    I have a 33ft Chris Craft COHO. The boat has a flying bridge and also a lower helm in the salon. There is a lever on the side of the lower helm station with a cable that goes all the way aft to the rudders. The level seems to select which helm moves the rudders, although I am not sure. I have no...
  4. S

    Shore Power Ground

    Working on a project boat. AC shore power cord is standard 30 AMP inlet. I traced all the wires inside the boat. The ground wire goes to the AC distribution panel. Question is should the AC ground wire be connected to the ground points on the engine blocks (i.e. same ground as DC electrical...
  5. S

    Need Service Manual

    This was also posted in the project boats forum.<br /><br />I just purchased a 1974 33' Chriscraft COHO project boat. The engines are Chriscraft engines. Port engine is Model 3500BL15, Engine #222977. Starboard engine is Model 3500B15, Engine #222980. Engines are small block chevy based. Both...
  6. S

    Need Service Manual

    I just purchased a 1974 33' Chriscraft COHO project boat. The engines are Chriscraft engines. Port engine is Model 3500BL15, Engine #222977. Starboard engine is Model 3500B15, Engine #222980. Engines are small block chevy based. Both engines don't run and I plan on pulling and overhauling them...
Top