Search results

  1. C

    shift cable timing on on my 4.3 L with a alpha 1 outdrive on a 1980's , 90's larson

    was wondering if i can sucessfully time the shifting from forward to reverse with the boat out of the water and just using the water hose with muffs on.did a removal of engine and drive and just putting everything back together.thanks for any input or help
  2. C

    trim/tilt switches

    both of my switches have black wires coming from them with no color sleeves on them. do i have to ring them out with my meter or does it matter if i have them switched. this is a mercury I/O , 1990 model
  3. C

    gas tank question

    I have a gas tank . its a poly tank and it has been sitting for about a year in my garage after i drained it . what is good to use to clean it out with before re-installing it ? picture is under " stringer questions" in boat restoration ,building and hull repair.
  4. C

    stringer questions

    Re: stringer questions
  5. C

    stringer questions

    Re: stringer questions
  6. C

    stringer questions

    Re: stringer questions
  7. C

    stringer questions

    Re: stringer questions
  8. C

    stringer questions

    Re: stringer questions
  9. C

    Previous post was "stringer questions, now is decking questions

    i will post some new pics of the stringer project, but my question now is what thickness should i use for my plywood deck ? I see alot of post on deck repairs but I haven't seen anything on the deck thickness. My boat is a 1990 larson bowrider 17 footer. about 5 feet across at the widest point...
  10. C

    stringer questions

    Re: stringer questions and more
  11. C

    stringer questions

    Re: stringer questions and more
  12. C

    stringer questions

    Re: stringer questions and some more pics
  13. C

    stringer questions

    Re: stringer questions here are some new pics, hope you can see the faint stringer lines and bulkheads. my guess is that the stringers were one solid piece with a whole bulkhead at the end and pieced bulkheads in between. What is the best way to layout your stringers and bulkheads ????
  14. C

    stringer questions

    Re: stringer questions and 2 more pics
  15. C

    stringer questions

    Re: stringer questions and some more pics
  16. C

    stringer questions

    Re: stringer questions here are some more recent pics. the boat is more cleaned out.
  17. C

    stringer questions

    Re: stringer questions
  18. C

    stringer questions

    Re: stringer questions these are some more pics. i only have half of the boat at this time with the decking off just to get an idea of what the layout is and what kind of measurements and heights i have to be at. once i get this side down all the way or most of the way then after i see things...
  19. C

    stringer questions

    Re: stringer questions would i be saying it right that wood supports going out to the sides of the boat are called " port stringers " ????
  20. C

    stringer questions

    Re: stringer questions
Top