Search results

  1. R

    Motorguide 70lb thrust intermittent cut out

    I have a Motorguide 24V Tour digital 70lb thrust trolling motor. The issue I am having is that the trolling motor randomly cuts out. Doesn't seem to matter whether on min or max. Basically I will be moving along the bank and the motor cuts out. The go button no longer works. If I hold the go...
  2. R

    1991 Mariner 135 spark plugs

    I'm primarily looking to increase my knowledge of my outboard motor. I read a few spark plug articles that stated you could read a plug and determine the characteristics of your motor. I.E. running lean, rich, etc. I've had a few issues the last time out with the motor being...
  3. R

    Mariner having starting problems in the heat

    I have a 1993 Mariner Outboard 135HP. First thing in the morning it still cranks over first or second time and purs at idle. However, as the day progresses and the temp gets higher (particularly over 85) it becomes more difficult for the motor to idle without dieing. Even after running down...
  4. R

    Transom rebuild "glue" or Bondo material

    Working on my transom rebuild for a 1993 18' Procraft. The original design of the transom had two 3/4" plywood laminated together. The plywood goes from the bottom of the transom area up until it is flush with the top of the hull. However, there is approximately a 1/2" or so gap (by design) that...
  5. R

    Where do I start from here?

    Hello all, My name is Chris and I own a 1993 17' Procraft bass boat. After winterizing my boat I started inspecting it to see if there were any small projects I could work on over the off season. I came across this leak towards the transom of the boat: Upon removing fasteners from where an...
Top