Search results

  1. J

    1995 200 hp Mariner starter problems

    The starter would not engage...sometimes. I ended up replacing the starter and getting a new starter battery. I charged the new battery just to be sure there was enough juice to engage the starter. It still would not engage, just spin with the bendix not jumping far enough to engage the...
  2. J

    master switch on procraft combo 200 not working

    Does anyone know if there are fuses to the master switch? this switch stopped working and I cannot get power to any electronics, live well pump, bilge pump and nav lights. Is there a common block that the hot wires run to? I have checked the pop out fuses located close to the dash and have...
  3. J

    fuel gauge not working

    I have 12 volts at the back of the fuel gauge, but only 4 volts coming out of the gauge, (pink wire), and only 4 volts at the sending unit. I remove the pink wire from the sending unit and the fuel gauge needle did not move. I ground the pink wire at the sending unit and again the needle did...
  4. J

    fuel gauge not working

    Fuel gauge not working; needle will not move. I have ground the pink and neutral wires at the tank and nothing happened. I have 12 volts power at gauge, but the pink wire that goes from the gauge to the tank sending unit only has 4 volts and at the tank, I still have those 4 volts. what is...
Top