Search results

  1. S

    1988 Johnson 70hp inspection

    Ever bore with one?
  2. S

    1988 Johnson 70hp inspection

    Thanks buddy, once again you came through....on another note, do you like the new color scheme and a hell of a nice guy gave me a CMC T&T.... Works great!
  3. S

    1988 Johnson 70hp inspection

    Oops
  4. S

    1988 Johnson 70hp inspection

    Prop guy says block must be at a certain temp to bore correctly. Any details you have would be muchly appreciated. Matt
  5. S

    1988 Johnson 70hp inspection

    W Was your machine like this one?
  6. S

    1988 Johnson 70hp inspection

    Guys up here are doing what they call "hone boring" and then just replacing rings. If the motor is just well used and not messed up it's a good way to get some more use out of it. My prop shop guy, who's a good close personal friend, has a Bridgeport machine....I would be interested in any...
  7. S

    ‘77 Johnson 70hp Starter Troubleshooting

    👍
  8. S

    1988 Johnson 70hp inspection

    Just sold this for $1500 after going through it. I bought two and they were a matched set that came off a whaler. 1986 and the vro's are going strong. Paid $1000 for the set I did replace the pulse limiter with the blue one.
  9. S

    1988 Johnson 70hp inspection

    In my area I can get an excellent used 70 for $500 saving significant denaros for other stuff. Yep, doesn't pencil here.
  10. S

    1988 Johnson 70hp - VRO or not to VRO?

    My vote would be to keep the very reliable vro and quit worrying. Pull the vro apart, inspect it and replace what's bad. Typically the fuel side diaphragm fails flooding your engine with oil. Vro is rarely the cause of engine failure. Once up and running, hook up 50 to 1 in a portable tank and...
  11. S

    No spark until end of cranking

    Understood, get your affairs in order.
  12. S

    1988 Johnson 70hp inspection

    I hate to disagree with race but finding a good used new to you outboard is a better financial decision. I live in Seattle and we don't have a marine machine shop anymore.
  13. S

    1981 Johnson 115hp 4 cyl

    To elaborate more on what Crosby and Race are saying, there is a tan wire coming out of each head. About 3 inches up that tan wire has a black rubber boot...you can either peal that back or do what I do and stuff a metal pick in it, than touch any clean ground while the key is in the on...
  14. S

    1988 Johnson 70hp inspection

    I'm with Tim on this otherwise I would just hone bore the two and take my chances.
  15. S

    Impeller kit

    And if you need any individual pieces for the gearcase and water pump assembly, you can find it here. https://www.marineengine.com/parts/johnson-evinrude-parts.php?year=1961&hp=40&model=35525&manufacturer=Evinrude&section=GEARCASE
  16. S

    Impeller kit

    Open this link, scroll down to 40 HP and under 1960 to 1970 you will see a Sierra part number. Click on that and the Sierra impeller and the Evinrude impeller will pop up. https://www.marineengine.com/parts/sierra-marine/quick-list/johnson-evinrude-sierra-impeller-water-pump.html Cheers
  17. S

    1989 Johnson power tilt/trim

    Since it's apart, why not.
  18. S

    1994 140hp evinrude

    👍
  19. S

    1994 140hp evinrude

    95 to 140... Could be your compression tester. I have 3...they all read differently. Check it right after you've earned it up.
  20. S

    1994 140hp evinrude

    S So 3/8 gap on all cylinders? Good blue spark? Compression states well used. Take it out for a spin.
Top