Search results

  1. R

    G3 1610 prep charges?

    Marketing 101 these days.------Offer a product at a low price and then add on some " fees " I think.
  2. R

    Excessive smoking

    The general public thinks that a 2 stroke is an inferior motor.------And those E-tecs operate like a 4 stroke for part of the revolution of the crankshaft.------Able to do that with a good computer.
  3. R

    Excessive smoking

    Lubrication / smoke /oil in gasoline going through conventional 2 strokes is much mis-understood.
  4. R

    1977 55 HP Evinrude

    Don\t use any kits other that factory " original quality " parts.
  5. R

    Excessive smoking

    Thermostat stuck open ??
  6. R

    1977 55 HP Evinrude

    Screw #30 and gasket #29 are missing in picture on post #12
  7. R

    1977 55 HP Evinrude

    You are not missing any adjustable mixture screws on your motor if it has the original factory carburetor.
  8. R

    Need help evinrude 48 at wits end

    Pictures would tell the difference between a 1988 and 1990 model in 2 seconds.-----
  9. R

    Need help evinrude 48 at wits end

    Checked reed valves ?---Compression may be a bit low.
  10. R

    1977 55 HP Evinrude

    Repeat.----#38 and #35 are fixed " calibrated " jets.-----They are put in snug.----They are NOT adjustable !
  11. R

    1977 55 HP Evinrude

    Your compression values should be around 140 PSI or higher.----I would remove cylinder head to investigate.---Sorry , perhaps you bought a " trouble motor "
  12. R

    1977 55 HP Evinrude

    Need to see the actual compression test values first.----Post them here.
  13. R

    Evenrude 20Hp ?

    The id tag on the transom bracket is off a 1966 model 18 hp.----But most will agree that the powerhead is not a 1966 model.
  14. R

    Evenrude 20Hp ?

    The serial # on the block is different than on the transom bracket.------The decals on the cowling make it a 76 in my opinion.
  15. R

    30hp 1989 yamaha firing problems?

    Did you replace the impeller ?
  16. R

    1977 55 HP Evinrude

    That spring holds choke OPEN at full throttle.---Nothing to do with your issue at the moment.----Did you clean high speed jets.---They are screwed into bottom of float bowl.----Did you soak carburetors in a strong cleaner?
  17. R

    30hp 1989 yamaha firing problems?

    Water pump impeller changed every 5 years ?
  18. R

    Evenrude 20Hp ?

    You can clearly see that it was assembled in Canada.----And the 20 HP was marketed in Canada for a number of years.----The 25 HP were also marketed in Canada and elsewhere !----For a number of years Evinrude stuck to 18 HP decals.-----Johnson marketed them with 20 HP decals.
  19. R

    1988 Johnson 4 Alternator

    Model numbers of the 2 motors ?----Are the 2 ignition systems the same on these 2 motors ?
  20. R

    Evenrude 20Hp ?

    I see the disc in picture # 6----Is the serial # there the same as on the transom bracket?
Top