Search results

  1. D

    40 Yamaha tachometer power feed

    I am installing an aftermarket Teleflex tachometer on a 2000 40hp Yamaha. The wiring harness out of the control box has a power (red) wire that appears to be continuosly hot, regardless of the ignition switch position. Should I use this wire for the power to the tach (it is bundled with the...
  2. D

    Shift rod adjustment 40 Yamaha '00

    Pulled lower unit and replaced impeller with gear shift lever in forward. Must have got the shift rod out of adjustment because only had forward gear regardless of shift lever position (no neutral or reverse) upon reinstallation. Pulled lower unit back off and thru trial and error (turning shift...
  3. D

    PTT switch connector

    Am adding a cowl PTT (power tilt trim)switch in addition to the one on the remote. There is a 3 wire switch coming of the trim motor for this purpose already prewired (2000,Yamaha C40trly) The male part of the quick disconnect (which would lead to the switch) is connected to the female connector...
  4. D

    '97 Johnson 4 hp stuck in forward

    Model J4REE stuck in forward. Gear shift lever goes from neutral to forward ok. Pulled lower unit and gear shift lever appears to work normally(the shift shaft moves up and down with gear shift lever actuation). The shaft for the shift lever appears to just go into the gear box through a small...
Top