Search results

  1. E

    1983 55hp timing

    Re: 1983 55hp timing ok,i think i get this.the manual calls for full retard position to be at 2 degree btdc and fully advance to be at 32 degree btdc so in order to get the fully advance position to be at 30 degree btdc instead i should be looking for 0 degree btdc at full retard position...
  2. E

    1983 55hp timing

    i have a 1983 chrysler 55hp,2 carb set up, with the prestolite cd ignition and i had a few timing question i thought someone might know?i just did a rebuild on the engine so i have to redo the timing.the clymer manual says to put the trigger in the full retard position while cranking with a...
  3. E

    bearing race install

    just tore my engine down to replace all the gaskets as they where original and most where leaking,upon taking it apart i found a crack almost all the way across my top end bearing on the crank so i got a new one and removed the entire crank to inspect the other bearings and races,they where ok...
  4. E

    83 chrysler 55hp flywheel nut torque

    does anyone know the correct flywheel nut torque for an 83 chrysler 55hp model # 559v3s i've got 2 differnt manuals and both of them give a different torque but neither one specificly list my year or model number,just the horse power? also when installing the woodruff key should it be tapped all...
Top