Search results

  1. alldodge

    Trailering

    Change to 5 to 6% on the tongue. I would probably like about 80 to 100 pounds, thinking the boat weights around 1200 to 1300 loaded
  2. alldodge

    Trailering

    Can do it with a bathroom scale if the weight isn't over 3000 lbs. Can also take it to a truck scale. This will show how, and your looking for about 5 to 6% on the tongue https://www.venturetrailers.com/resource/how-can-i-calculate-my-tongue-weight/
  3. alldodge

    Replacement Leaf springs

    Thanks, unless your going to change the way they attach, you have to stick with slipper spring type. Can find ones which are lighter load, but would need 1750 lb each for a 3500 axle. Need the length and then choose There are several sites, this is just the first one that came up...
  4. alldodge

    Trailering

    I'm unable to say, load the boat and see how much tongue weight you have
  5. alldodge

    89 Rinker Restore: Seeking suggestions for new SBC350

    Go to the thread I posted at OSO and see what the guy is saying
  6. alldodge

    Trailering

    Might need to find another welder and have the bow stop moved/modified Or make something to stop the hull short of the bow stop
  7. alldodge

    no spark , Please help

    Check for 12V at the + side of the coil with key ON Rotate the distributor until the points are closed, then use a wood or plastic piece and open the points and see if there is a spark
  8. alldodge

    Omc 4.3 carburetor issue/identification

    Need more info then that Serial number Carb number Looks like a Merc/Rochester 2BBL
  9. alldodge

    Trailering

    Move the bow stop so it sits further back if it can be done
  10. alldodge

    Motor not staying primed after 2 hours

    Didn't understand what you said about your tank design Try this, get a 5 gal can and put a fuel line in and see if there is any issues.
  11. alldodge

    Trailering

    The trailer is longer and wider then the boat, yes you can without issue Can tow a row boat on the 30 foot trailer with no issue
  12. alldodge

    89 Rinker Restore: Seeking suggestions for new SBC350

    I'm unable to say, but asked guys who should know on OSO https://www.offshoreonly.com/forums/do-yourself-boating-budget/370776-350-sbc-cam.html
  13. alldodge

    Motor not staying primed after 2 hours

    That would be the key from me also The primer bulb should pump up hard for the first start, once the motor is running the bulb should not stay hard. The fuel pump should be able to suck/pull fuel from the tank without issue. Boat probably has a mai tank and not a portable type. Remove the...
  14. alldodge

    Mercruiser 6.2L Bravo 3 I/O alignment problems

    Put your fingers in the bearing and rotate to see if it feels silky smooth. Next try to move the bearing around (tilt it) with your fingers, can this be done? If unable to tilt, this would be good. Place alignment bare in and see if it will go in by moving the bar around
  15. alldodge

    Power outlet

    Grub, you beat me to it, was about to post that :D
  16. alldodge

    Power outlet

    Coffee maker is 600-1200 watts, depends on which one you get Probably a 1500 would be best
  17. alldodge

    Power outlet

    Phone charger can be run off a cigarette lighter socket and an adapter on a 15 to 20 amp line. https://www.amazon.com/Compact-Car-Socket-Power-Adapter/dp/B002HQYM5E A coffee pot needs a lot more power. Will need a dedicated battery and an inverter. If your pontoon uses a outboard then your...
  18. alldodge

    Replacement Leaf springs

    Post a pic of what you have so we can get a better idea of your question
  19. alldodge

    89 Rinker Restore: Seeking suggestions for new SBC350

    Don't need a 750 CFM carb for a SBC, its more carb then the motor can use. Only need 600 CFM like a Edelbrock 1409 Don't need a cooling crossover pipe, just a circulation pump The distributor listed is for a TB 4 or 5, don't need a ECM need a TB module, or change to Delco EST If your old...
  20. alldodge

    2007 Baja Islander 202

    There are core plugs on the rear of the block. One of them has rusted out or pushed out. Will need to pull the motor and remove the bell housing to find out
Top