Search results

  1. Scott Danforth

    Fixing Up Boat Help

    buying a used boat for cheap is like buying a rusted hulk from a junk yard and trying to make it a daily driver. remember, the prior owner quit running the boat for a reason. the dash looks like it has sat outside in the elements for at least 20 years assume the transom, stringers and floor...
  2. Scott Danforth

    Stroker engine build

    the videos were with 18" long elbows. at about 750 RPM, there was enough vacuum during the overlap cycle to pull the water vapor back in. it filled the exhaust manifolds up with water, just idling on the crate. I went with side exit exhaust. since I could no-longer use the captains call...
  3. Scott Danforth

    Name this boat

    Going to name the boat "giant floating suckhole for cash currently sitting on a trailer" Seriously, expect to spend a minimum of $10,000 to restore it. $3k on the hull, $2k on the interior, $1-2k on the motor, $1-2k on the drive, and $1-2k on misc ( trailer, cabin, wiring, lights, etc). You...
  4. Scott Danforth

    Electrical problem after doing something dumb

    If you are not mechanically inclined or electrically savvy like you say, take it to your local marine mechanic
  5. Scott Danforth

    Flybridge windshield 85 36’ mainship aft cabin

    Is the windshield flat or curved? If flat, your local glass shop or local plastic shop If curved......sell a kidney or take out a second mortgage and call TMS
  6. Scott Danforth

    Older 25 HP 2 Stroke

    when was the last time the impeller was changed. look for signs of overheating
  7. Scott Danforth

    Stroker engine build

    then find a boat newer than 15 years old. I have slow speed video of the cam on my BBC pulling in water vapor from 12 feet behind the collector. I had to go with a custom H-pipe and water-jacketed exhaust in order to run my mufflers.
  8. Scott Danforth

    Pontoon Boathouse

    here you go
  9. Scott Danforth

    2021 Divisional Weekend

    so....... do I root for the Pack...... or the Bucs....... either way, will be drinking a few during the game.
  10. Scott Danforth

    Stroker engine build

    the rogue would be a nice boat....:D...... however you will most likely need to rebuild the transom, rear foam boxes and, bulkhead just forward of the motor and the stringers in between.
  11. Scott Danforth

    Stroker engine build

    I would shoot for 9.5:1 or less. as Scott stated, stock motor was 9.4:1 vortec heads allow you to run slightly higher compression than the combustion chambers prior with wet exhaust, stick to 270 degrees of duration of less with wet exhaust. or you need to go to a dry jacketed exhaust...
  12. Scott Danforth

    Neutra Salt System Solenoid and pully question VP 5.7 Gi-f

    they are simply a spring loaded arm. been used since the 80's
  13. Scott Danforth

    Neutra Salt System Solenoid and pully question VP 5.7 Gi-f

    The neutrasalt system may be plugged. Its a simple system, however requires the raw water pump to be pushing water to work.
  14. Scott Danforth

    Should I keep the Volvo 280?

    you have to look and be ready. I scored a complete second 290DP from transom shield to lower for under $800 had to be in the right place in the right time.
  15. Scott Danforth

    Should I keep the Volvo 280?

    Find a complete 290dp drive to replace the 280. Then upgrade the motor to a 383 stroker
  16. Scott Danforth

    aquasport 175 osprey

    Famine proof.....LOL...... Where does that fall in the Big - Healthy Heavy - Husky - Fluffy - and Daaaaamn! Rating?
  17. Scott Danforth

    Martinique 2600 year 2002

    https://www.wellcraft.com/us/contact contact them. talk to their customer service department (btw, you get faster response if you call them)
  18. Scott Danforth

    1986 Mercruiser 470 Starter & Fuel Pump

    regarding the fuel pump. original pump was a carter M60337. https://www.rockauto.com/en/moreinfo.php?pk=296900&jsn=3 or https://www.summitracing.com/parts/crt-m60337?seid=srese1&gclid=CjwKCAiAl4WABhAJEiwATUnEFy3SxoNgfF-TG4noyC7lrGdhE1mjNcXZ3x1b7NxBBjvGvooM2M0OkRoCk3MQAvD_BwE fittings are...
Top