Search results

  1. Allen 79 wrangler

    I need help with my Johnson 9.9

    I took it to a boat shop, I am tired of messing with it. I have done everything you all have suggested at least twice.
  2. Allen 79 wrangler

    I need help with my Johnson 9.9

    I have worked on this engine for weeks, it has a new CDI electronics ignition and I have replaced everything. the first Compression test showed 130 PSI per cylinder. it has started a few times for a few seconds and quits.
  3. Allen 79 wrangler

    I need help with my Johnson 9.9

    I followed your procedure after I reassembled the engine. I was trying once again to ensure that the new fuel lines where no kinked. I tried to start and nothing. I took out the new spark plugs that I just bought from the boat shop. They only had the alternate its the one with no ground strap...
  4. Allen 79 wrangler

    I need help with my Johnson 9.9

    I will get back to you as soon as I complete this task.
  5. Allen 79 wrangler

    I need help with my Johnson 9.9

    The sensor is installed I have good spark and cannot get the engine to fire. Rebuilt carburetor and fuel pump, replaced plugs and wires, replace hoses. the engine will not start. What am I missing?
  6. Allen 79 wrangler

    I need help with my Johnson 9.9

    I have been building this boat over the past year in support of Vffmission.com
  7. Allen 79 wrangler

    I need help with my Johnson 9.9

    I have been trying to install a CDI Electronics Power pack conversion part number 113-4488 on my 1989 Johnson 9.9 Serial number R08241545 Model TJ10ELCES. I am having difficulty getting the sensor to fit properly and could really use some instruction.
  8. Allen 79 wrangler

    I just got me a motor. 1990 Johnson 9.9

    I have a 9.9 Johnson and want to put it on a 12ft semi vee John Boat. can I just swap the 20 inch lower for a 15?
  9. Allen 79 wrangler

    All new 3/8 fuel line run from tank to engine. Tank emptied and inspected. I will later install...

    All new 3/8 fuel line run from tank to engine. Tank emptied and inspected. I will later install a water separator filter when I get more money.
  10. Allen 79 wrangler

    Is 5/16 fuel line sufficient for a 115?

    Is 5/16 fuel line sufficient for a 115?
  11. Allen 79 wrangler

    Mariner 115 serial 6632846

    I posted more pictures and gave an update in the thread.
  12. Allen 79 wrangler

    Mariner 115 serial 6632846

    I posted more pictures and gave an update.
  13. Allen 79 wrangler

    Mariner 115 serial 6632846

    The engine starts at the first turn of the key with fogging oil. Today I drained the old gas and am ready to run new hose. The problem is I bought 5/16 instead of 3/8 will this be an issue for a 115 horse power?
  14. Allen 79 wrangler

    Mariner 115 serial 6632846

    Obviously from the pictures the transom is roached, and it looks like Papa Roach has made some roachy repairs. I am not concerned about that because 1) I paid nothing for the boat. 2) Transom in a can (Arjay 6011) comes UPS. 3) The compression test scored 130 PSI in all 6 cylinders. Yeah she...
  15. Allen 79 wrangler

    Mariner 115 serial 6632846

  16. Allen 79 wrangler

    Mariner 115 serial 6632846

  17. Allen 79 wrangler

    Mariner 115 serial 6632846

  18. Allen 79 wrangler

    Mariner 115 serial 6632846

    Good eye, I would have never caught that. This boat was a gift and I am learning. I am trying to determine if it is worth fixing.
  19. Allen 79 wrangler

    Mariner 115 serial 6632846

    Here are a couple of reference pictures.
  20. Allen 79 wrangler

    Mariner 115 serial 6632846

    I have a newly acquired Sea Squirt with a Mariner 115. I think it is a 1985, the first issue is the fact that I cannot get the trim to raise off the transom saver. The pump spins to go down but not up. This will be the first step in getting her up and running or determining if the efforts are...
Top