Search results

  1. J

    Tricks to hold flywheel to tighten nut

    You're not reading the post. He is not removing. He is installing and needs to torque the bolt. Post is just a bullshit posting anyways. If he can rebuild the engine. I'm sure he knows how to stop engine from turning
  2. J

    Saving the paint sides of my hull with 3m

    I could rase the bunks. But the lakes are getting so shallow that I would have to back in farther . Something I don't like doing . I did buy some 3 m to place on the side of my hull , now my bunks are tight on my haul. Now when it's windy and white caps are blowing 3 ft high . I can load...
  3. J

    Tricks to hold flywheel to tighten nut

    The tool is called a screw driver. Just placed between flywheel teeth and that bolt sticking out
  4. J

    Water pump parts

    Thinking of replacing my water pump on my 150 varado Is there a website I can get one that includes delivery.
  5. J

    67 Year Old Head Bolts

    Turn bolt head very slowly. Out ward and in ward . Both ways . Also hit with hammer and punch soaking and heating might help
  6. J

    Chinese carbs

    Might want to check the carb gasket. Might have put it in upside down or backwards
  7. J

    Honda BF50A. Delayed water cooling discharge

    The whole lower leg was just replace last year
  8. J

    Honda BF50A. Delayed water cooling discharge

    The whole lower leg was just replace last year.
  9. J

    Honda BF50A. Delayed water cooling discharge

    After launching the boat in the lake and starting it up for warm up, I'm getting no water coming out of the cooling pee hole . But after a few minutes I will drive away and have another look and it's running out. Is this normal that it's delayed. Does a thermostat need to open before it...
  10. J

    Smart Craft Alarm Lost Engine Com. 150 merc Varado

    I got caught in a storm and just as I was loading shallow water the leg went deep into some sand and stopped the engine . Lifted the engine and it start . Loaded boat and now in garage tilt will not go up or down on engine cowel or hand throttle . Turned key on and i get an Alarm ...Lost engine...
  11. J

    Tricks to hold flywheel to tighten nut

    I work in the master rebuild center at cummins .. Fast and easy way is to place a screw driver in the flywheel teeth near that bolt on the out i see in your picture at 3 o clock . As the flywheel turns ,your screw driver will stop agains the bolt and stop turning . My i also say you have to hold...
  12. J

    Water in engine oil. 150 mercury Varado.

    2012 Mercury Varado 150 This makes me sick to my stomach ! Oil level is up one inch . Was between hatch marks on dip stick the week before. It is now like a thick vanilla milk shake. Engine runs perfect . What is the trouble shooting tree ,on what to do first or look at first .
  13. J

    lund bimini top

    I have a 2006 crossover 1875 and it comes with a Bimini top that snaps to the front window . It sits high that you can walk under it . Does not have the clear plastic on the front panels ,I wish it did . Anyways Has any one made or can you buy an add on pole for the Bimini so the tarp gets...
  14. J

    Crossover Bimini top

    I have a 2006 crossover 1875 and it comes with a Bimini top that snaps to the front window . It sits high that you can walk under it . Does not have the clear plastic on the front panels ,I wish it did . Anyways Has any one made or can you buy an add on pole for the Bimini so the tarp gets...
  15. J

    Anchor lock / hand crank

    My boat is a 20 foot Lund and I just picked up a 20 pound river anchor threw Cabela's . I see scotty has a anchor rope lock ,but the add says only for small boats. Is there anything else on the market for self locking unit or even a hand crank.
  16. J

    Valvoline marine oil in a Mec 150 Varado

    Just reaching out if anyone uses Valvoline Marine oil or even Valoline VR1 racing oil in their Mec 150
  17. J

    Saving the paint sides of my hull with 3m

    Just bought a new 1875 Lund and tried it out this last weekend . Centring it back on the trailer was not easy in the wind . So i installed some side bunks like I had on my fiber glass boat. I like to keep the bunks tight on my boat but this one being an aluminum painted hull I know the paint...
  18. J

    Honda 100 10hp

    I have an old Honda 100 /10 hp motor that i will be using as a kicker or a backup if the main engine fails. It has a DC outlet plug on the out side So I hooked up a volt meter and the voltage starts at 6 v at idle and goes as high as 32. volts when wide open. Will it regulate it self...
  19. J

    AQ125 cuts out when up-shifts to second

    My 84 Baylinner has a AQ125 with a 270 leg . On the hand throttle ,as you move it forward about 1/8 -1/4 forward the boat will move forward smoothly up to 3 mph ,we call this 1st gear . When you push the lever forward more you can feel a little click or bump in the hand throttle . I call this...
  20. J

    Fuel fill up vent to low

    I find on my 1986 Baylinner inboard that the vent for the fuel fill up is lower than the fill hole. It is located About 3 feet to the left of the fill cap. So when I fill up fuel ,i get fuel coming out of the vent and splashes out at the gas station drive way . Because this happens the fuel...
Top