Search results

  1. bassfearmee

    1989 Evinrude 50hp Reverse but no Forward

    I was driving my boat at full throttle the other night and completely lost forward thrust. Motor runs great, reverse and neutral are fine but no forward gear. I can't even sense it shifting into gear when I put the throttle forward. A few things: First, I changed the water pump and the...
  2. bassfearmee

    1989 Evinrude 50hp Primer Solenoid

    Guys, do I really need the primer solenoid? I broke the fuel line nipple and can't fix it. I capped off the fuel lines to and from this thing and the motor starts and runs fine. I've never had to use the primer before, even when the motor was cold, because it would actually take longer to...
  3. bassfearmee

    1989 Evinrude 50hp trim pump noise

    Hi, my trim pump on my 89 Evinrude 50hp works fine but makes a screeching noise when lowering the motor. When raising the motor, it sounds good, but coming down is the problem. I've topped off, raised/lowered 5 times, topped, raised lowered and no change. I noticed that when I open the fill...
  4. bassfearmee

    1989 Evinrude 50hp fuel pump replacement

    Hi, I have a 1989 Evinrude 50hp VRO. I removed the VRO pump and replaced it with a premix pump. The new pump is for a 1995 50hp premix. The reason I went with this pump is because it has a third nipple that will accept my existing pulse hose from the engine (which went to the old VRO) The...
  5. bassfearmee

    1989 Evinrude 50hp water pump question

    Hi, I'm replacing the water pump on my 1989 Evinrude 50HP. The new base has a rubber gasket that is loose. It won't seat in the base, should I use RTV sealer to get it to stick under there? Also, the new rubber grommets/seals for the top of the base don't really stay on very good. These are...
  6. bassfearmee

    1989 Evinrude 50hp timing issue

    I have an 89 Evinrude 50hp 2 stroke, VRO removed. I purchased this motor last summer, and it ran fine for two months, maybe a little rough but it still ran fine. I decided to check the timing in August and found that it was -8 degrees BTDC (8 degrees AFTER TDC,). The timing should be 19...
Top