Search results

  1. K

    89 mercury 115hp, is there a missing linkage????

    I would think i would need some type of linkage from the carb sinc bar to the throttle bar so when the throttle is engaged that it works the carbs... I just need to know before i put it in the water to go nowhere....
  2. K

    I hope my prop is not to big

    115 mercury pushing a 17' astro, current prop is quickfire 2 22 degree..... just bought this boat and already have money in motor dont need future problems..... any info will help
  3. K

    89 115 mercury throttle question

    should there not be a linkage bar that attaches the carbs to the throttle control bar under the cowl...... the only thing attached to the carbs is the sinc bar.....the previous owner has removed the oil injection, but didnt get rid of the connection boxes for all the lines, which also has some...
  4. K

    Throttle question

    89 115 mercury, should there not be a linkage for the throttle to the carb sinc bar or one of the carbs. the oil injection has been removed.
  5. K

    WOT in idle (solved)

    A couple of weeks ago I had a problem with WOT in idle, as i explored the problem I finally found a bolt stuck in the carb. I removed it and started the boat to find that I still had the problem. So I then noticed that the carb flangs on 3 of the 4 carbs where slightly open so i readjusted the...
  6. K

    still wide open in idle???????

    :confused:I am still wide open in idle is a float stuck or maybe a sillanoid is malfunctioned on the fuel pump?????
  7. K

    filling the void of oil injection???????

    :confused: I would like to know what i can do to fill the void of the missing oil injector. which they have left the connections but took the tank and lines out. so that the hose connections are open and i know one leaks gas and the other probably sucking in air :confused:
  8. K

    wide open in idle

    I have a 89 115 mercury, with a start up in the early morning my motor took a couple of tries to start up and when i got the it started it stuck at 4500 rpms screaming and did not let up so i shut her down and tried again to get the same result. I checked into the situation and noticed several...
Top