Search results

  1. Scode68

    Stalling at Idle and Idle Speed

    new problem found yesterday. While I'm idling or just just in gear at low speed in a No Wake Zone the motor stalls like I'm running out of fuel. While running at speed the motor runs normal and doesn't stall. Fuel primer bulb is soft but not collapsed. Have a vent fuel cap but when cracked...
  2. Scode68

    2001 200hp Carburetor Torque Specs

    Hi, I'm looking for some torque specs for the side plates and bowls on a 2001 Johnson 200hp J200VXSIF. would like to know what a Evinrude manual says cause I think the SELOC numbers might be incorrect. Mechanic said they should only be like 15 inch lbs.
  3. Scode68

    2001 200hp Johnson Float Bowl 0439180

    Anyone know of new ones being made? I can't seem to find any for a J200VXSIF .
  4. Scode68

    Fuel Dripping From The Carbs When It's Hot Out - 200HP Johnson 2001

    2001 Johnson 200HP Ocean Pro, When it's hot out (85 and up) I see fuel dripping onto the driveway. Not sure if its a float adjustment or maybe vent blockage since I do have to pump the bulb up to get pressure in the line. What do you think? Runs fine with no issues.
  5. Scode68

    Fish Box and Deck Drain Solution Aquasport 215 Sport 2001

    So, on the 215 Osprey Sports the deck drains into the engine well which in theory sounds great but then there are the two fish boxes that are nearby. Even with the boat tilted pretty good on the trailer it doesn't drain well and water back up and will fill up the fish boxes. Doesn't seem too...
  6. Scode68

    No Reverse 200hp Johnson Ocean Pro 2001

    Just trying to feel out if this is just an adjustment or the clutch dog or gear might be bad. I took it out and would get a lot of chatter going into reverse but would go into gear and hold there. 2nd time out I get a lot of chatter going into reverse, but it will not go into gear. It does...
  7. Scode68

    Did I Spin My Prop Hub?

    So I hit a submerged pallet and I think I spun the hub. Didn't see the pallet until after it was kicked up by the prop. I marked the prop and sleeve before hand and what is the chance the prop keeps hanging up in the same spot? Everything was working and running well up to 4500 RPM before...
  8. Scode68

    Shift Shaft Removal 20HP

    So I need to pull my shift shaft (95-20hp-OG113) and the manual if kind of vague. All it says is to pull it out. I really don't want to damage the boot if it can be salvaged cause it looks to be in good shape. How is the boot held in, is it glued?
  9. Scode68

    Do you use Loctite on your lower unit bolts?

    Do you use Loctite on your lower unit bolts? The copy of the manual says to use a kind that is no longer made but there isn't any evidence of there being any on the bolts. I've had this motor since new from 1995. Same is called out for the water pump also but it looks like there might have...
  10. Scode68

    Are BPZ8HS-10 and BP8HN-10 Spark Plugs Interchangeable?

    I have a 20HP OG113 engine and thought I was getting the BP8HN-10 plugs but it looks like I was sent BPZ8HS-10 plugs instead. Does anyone know if these spark plugs are interchangeable or am I sending them back? I know the BP8HN uses the larger socket than the other but thats all I see.
  11. Scode68

    Service manual 1995 20HP

    Looking for a service manual for a 1995 built 20HP, 2 stroke OG113758. I'm dropping the lower unit to install a Bay Manufacturing kit. While I'm at it I'm going to do the impeller so I need torque specs for the lower unit bolts and the pump bolts. I also notice the parts catalog calls for...
  12. Scode68

    Short to Long Shaft swap on a 1995 20HP

    I have a 1995 20hp short shaft motor that I bought in 1997 but want to convert over to a Long shaft (20"). I'm running into issues on what parts I can use from what years from different marinas and parts people. For example I've been told the exhaust housing can be from 1985-2006, 1984-98 and...
  13. Scode68

    1995 Mercury 20HP what years are compatible?

    I'm looking to change this short shaft motor over to a long shaft and was wondering if someone can give me a quick answer on what years are compatible. It's a 1995 Mercury 2 stroke tiller with a short shaft.
  14. Scode68

    1995 20HP tiller from short to long shaft

    I have a 1995 20hp short shaft tiller motor that I'm looking to possably convert to a long shaft. I know the same year 25 parts will work but has anyone already done the search and can tell me what other years and motors I can use for part? Figured I would ask before I spend a bunch of time...
  15. Scode68

    @@ 1996 90 V4 HELP on Thermostat

    Think I need to change out the thermostats on the J90TLEDA because the alarm is sounding, the heads are hot but the hoses are cool. How do I drop the lower cover so I can get at the thermostat housing bolts? Took the two lower parts off and 4 bolt that I thought held the lower cover on but it...
  16. Scode68

    J90TLEDA Carb Linkage Photos

    :facepalm: I have a Johnson 90hp V4 J90TLEDA that I?m looking for photos of the way the carb linkages are set up. I took photos before I rebuilt the carbs but my computer crashed and I lost those pictures. Does anybody have or can take some clear shots and post them on here? Maybe there is a...
  17. Scode68

    Which cleaner and how for carb rebuild?

    I bought a can of Berryman a while back to soak the carbs but then was advised not to soak them. What is the proper way too clean a carb? This stuff always worked fine for me in the past when I had to rebuild a carb on a car. Braking them down you could see a sludge that reminded me of sugar...
  18. Scode68

    Is the OMC 435918 Filter Superseded?

    Was looking under Sierra and Mallory for an aftermarket replacement but I've had no luck. Does anybody know if the OMC 435918 inline fuel filter was superseded. I can find 5/16" and 3/8" inline filters but no 5/16" in with 3/8" out.
  19. Scode68

    Any body have a Sierra number for an OMC 435918 fuel filter?

    Any body have a Sierra number for an OMC 435918 fuel filter? It has a 5/16" in and a 3/8" out nipple.
  20. Scode68

    Thermostat Kit 1996 Johnson 90hp V4 J90TLEDA

    I was looking for a thermostat kit for a 1996 Johnson 90hp V4 J90TLEDA in the store but did not see one. I see 19883-1995 and 2004-2006 listed only. Any suggestions?
Top