Search results

  1. R

    Oh Boy! Got myself in a bind with new Honda

    So yesterday I bought a new Honda 50 HP (gave a deposit) and it never dawned on me that my built in gas tank in my 16 Sylvan (18 gallon Mueller) has a 50:1 oil mix in there. The Honda is 4 stroke and doesnt mix oil with gas. Now I realize I can syphon the gas out but wont the oil residue left in...
  2. R

    Yamaha 8 HP wont go into gear. HELP!

    I have a 2006 Yamaha 8 HP motor I use for trolling. Today it started right up but when I pushed the shifter in forward or reverse, it just stayed in neutral. It just wont come out of neutral. Can anyone help me out here? Thanks in advance Bob
  3. R

    2000 Nissan/Tohatsu 8 HP squirts water out the front of lower unit. Is this right?

    I bought a used 8 HP Nissan outboard (2000 model) and I noticed when hooking up the muffs with a hose, it squirts water out the back in the normal place but also out a small hole in the front of the unit. I went online and it seems a few others also noticed this. Does anyone know if this is...
  4. R

    30 HP Johnson electric start on the blink. Could use some advice.

    I have a 1995 30 HP Johnson electric start tiller. Last year when I went to start it,I would press the button and all I would hear is a grinding or humming noise. If I kept pushing it eventually, it caught and the motor started. Recently I just tried starting it after the winter and same thing...
  5. R

    115 Yamaha 4 stroke question about drain gas out

    Recently I got a Yamaha 115 4 stroke outboard. I have always had smaller outboards 5-30 HP range and I always drained the gas out of them before winter by disconnecting the hose or loosening a carb screw to drain. Any idea how I drain the gas out of this motor? I dont see a quick disconnect...
  6. R

    Does it matter fuel hose diameter on Honda 5 H.P?

    I need to get a new fuel hose for my 1998 Honda 5 HP kicker. Would the hose diameter matter a whole lot. I believe Honda uses a 6 mm hose but I cant find it locally. Can I just get a generic 3/8" hose assembly and use the honda fittings? Would it affect the way the motor runs any? Thanks
  7. R

    Alumacraft Navigator/Competitor track mounting question

    I just got a 1 year old Competitor 175 and I am trying to mount a track system for rod holders, downriggers, etc but have found the top of the gunnel to be a bit too narrow for the holes in the Berts tracks (3.5" wide). I guess I could redrill the holes but why at $50 each? Has anyone else with...
  8. R

    Dumb question about mounting motor

    I just got a used boat only 1 year old and I noticed the 115 HP outboard is not touching the transom by about 1 inch and is bolted instead with 4 huge bolts. Shouldn't the bottom of the motor be touching the top of the transom? Seems like a dumb question but if thats how the dealer rigged it, I...
  9. R

    EZ Loader Trailer issue with transom saver attachment. Help anyone?

    Recently I got a 2012 EZ loader bunk trailer (19'), nice trailer but on the very back where the transom saver attachment socket would have to attach there is a long LED light that is smack in the way. I have looked at several types of sockets but the light is in the way of everything. There is 1...
  10. R

    Yamaha F115XA to kicker motor connection?

    Does anyone out there have a Yamaha F115xa connected to a kicker motor that can tell me what you are using for a connector rod/kit? I see there are several after market ones but seems like they all have to be jury rigged with hose clamps, etc. Thank you much.
  11. R

    Can someone tell me what this part is?

    I have a 2013 Yamaha 115 4 stroke I just got used. There is a small triangular bracket with a threaded hole in the front. Im thinking this is for connecting a kicker motor but not sure. Can any yamaha owner identify this part or better yet tell me how and where you connect a connector rod to the...
  12. R

    transom tie down and gunnel strap????

    If you have transom tie downs on a 18 foot aluminum boat with a 115HP outboard, should you also have a gunnel strap or is that overkill? Thanks Bob
  13. R

    Kicker motor question for 25" transom 15" or 20" shaft?

    The new boat I got has a 25" transom so which size shaft should I use for a kicker 15" or 20" outboard???? Thank you.
  14. R

    Trailering a Yamaha 115 HP question power tilt up or not???

    Recently I got a new boat (1 yr old Alumacraft) with a Yamaha 115 HP 4 stroke outboard on it. The dealer sent me off with the motor up using the power tilt and a locking lever (He lowered it a bit on it lastly). SO I drove it home about 7 hours without any issues that I am aware of. The Yamaha...
  15. R

    Evinrude 8 HP not getting gas

    Can anyone tell me if when you press the gas bulb and it doesnt fill up with gas you are supposed to hear air coming out of the fuel pump/filter area? I cant get gas to it, bulb wont get hard but all I hear is air coming from under the hood. Tried 2 different tanks so far. Im at a loss. Anyone...
  16. R

    Question on transom drain tubes

    I need to replace the holes in the splash well that drain water out. I think they are called transom drain tubes. I got some that are 1" in diameter and brass. They are curled (flared) on 1 end but how the heck do you curl the other end?? Do I need a special tool? Thanks
  17. R

    Transom repair- Need alternative to epoxy coating

    I am in the process of replacing the transom on a 14.5' Grumman Aluminum fishing boat. I am using 3/4" marine plywood (doubled up for 1.5" thick like it was). I bought some West system epoxy coating but the price was obscene (about $85 including the pumps). I have not used it yet and would like...
  18. R

    Cost to convert long shaft to short on Johnson 9.9?

    Can somebody give me a rough estimate what it would cost to convert a 1997 long shaft Johnson 9.9 to a short shaft? Is it fairly easy or would I need an outboard mechanic to do it? Thanks
  19. R

    Tohatsu 9.8 tiller install and cost??

    Does anybody have a rough idea what it would cost to convert a 2005 Tohatsu 9.8 HP remote to tiller steering? I have my eye on one but it would have to be converted? Part? labor? Thanks much. BP
  20. R

    Broken plastic bearing buddies. Im screwed

    Well I was adding grease to the fitting on my plastic bearing buddy type ( I didnt buy them, they came on the boat trailer when I got it) and the thing snapped off right on the grease gun and the spring went flying. Now Id like to remove this horrible invention (who was the genius who decided...
Top