Search results

  1. C

    1977 140 making popping noise

    I have a 1977 evinrude 140 and I have been working on it for some time now and I'm hearing a snapping or popping sound either coming from under the flywheel or in the vicinity of the powerpack or the coils . I can't really hear where it is because the engine is so loud ,but it is intermittent...
  2. C

    1977 evinrude 140 getting spark on 1 and 3 only

    Engine got run with 24:1 fuel mix and eventually started running rough, fouled plugs and only getting to about half speed at full throttle. very hard to start, finally after replacing plugs and fixing fuel mix , but can't get it to idle on it's own. How do i fix the problem and find out why 2...
  3. C

    1977 evinrude 140 added too much oil, now won't run

    I took out my 1977 evinrude 140 model 140743S and mixed the gas with 1 quart oil to 6 gallons instead of 1 pint to six gallons. Ran badly for about a half hour then motor quit and I couldn't start it again. I found my gas mistake and corrected the mix and replaced the plugs and then the engine...
  4. C

    evinrude 140 idles rough, surges

    I just replaced timer base, power pack and rebuilt carbs. it's running much better but still not right, idles rough, surges and engine bucks until I rev up then everything starts to smooth a bit . could this be timing issue? any ideas, it seems like its missing but i am getting spark on all 4...
  5. C

    gear lube quantities for 1977 Evinrude 140

    How much gear lube is needed to fill the resevior when I change the premium gear lube in the lower unit so I know how much to buy. The key on the flywheel was sheared and it threw the timing off and i had disconnected the kill switch wire while I was troubleshooting the timer base and powerpack...
  6. C

    replaced timer base and power pack, now backfiring

    Thanks for all the help with my spark problem, I replaced the timer base and powerpack and sprayed some starter fluid into the carbs and lifted the fast idle lever all the way up and it fired right up. I put down the idle lever and it idled fine, then I put it in gear and throttled it up to...
  7. C

    need trigger sensor for rude 140

    Can someone please help me I have been trying to get a 1977 evinrude 140 running for a couple of months now and I finally got the carbs cleaned and somehow lost spark while reattaching the carbs. I have been troubleshooting and after buying meters and DVA adapters I now know that I have a bad...
  8. C

    no spark after decarb, 1977 Evinrude 140

    Engine was running poorly, wouldn't stay running at idle so I decarbed and when I put carbs back on there has been no spark at the plugs ever since. I have checked the Yellow and black wire at the power pack, no change, disconnected yellow wire from stator, no change , doesn't seem to be points...
Top