Search results

  1. madhtr

    89 force 50 runs on one cylinder ... After running gas out and refilling

    Like clockwork, my force 50 runs fine till I run it out of gas, refill the tank, and pump the bulb, whereupon it limps back to the ramp on one cylinder. Every time, heh. Any ideas? Thanx:)
  2. madhtr

    1989 Force 50hp ... Which is 'number one' cylinder?

    ... top or bottom? I'm doing some ignition work on this motor and I need to make sure that the coil plug wires are connected to the proper cylinders Thanks! :)
  3. madhtr

    Ethanol and outboard motors ... Can I run my force 50 on 100LL avgas?

    It turns out that old 2-stroke outboards don't play really nicely with gas/ethanol mixes ... Ethanol Bad Yet, as a new boater, and an old private pilot ... 100LL Avgas is still straight Gas You know why, right? Because it's BAD to have an engine failure in an aircraft. So ... as a fairly...
  4. madhtr

    1989 15' Capri Side panel upholstry stage completed :)

    I bought this 89 capri with a trailer for $500.00. The trailer had no title, (I finally got that cleared up) so in the mean time, I decided to redo most of the interior upholstry which was cracked up ... Before: After: I used the original foam, but replaced the wood and vinyl. I replaced...
  5. madhtr

    89 Force 50 ... possible fuel vent issue?

    I am having an issue an 89 Force 50. about 20 mins into my run I experienced a rather sudden drop to quarter power at WOT issue. pumped the bulb, no dice. I Anchored, visually inspected fuel tank and the vent-cap. It was screwed open (counterclockwise to the stop) like I always did them. Then I...
  6. madhtr

    Force 50 ... flippin flywheel

    89 Force 50 .... harmonic puller and three grade 8 bolts ... one grade 8 bolt pulled clean apart, the threaded end still stuck in the flywheel. I guess i'll just tow the whole thing to the boat shop and see if they can get it off. I've been working on cars all my life and have never failed to...
  7. madhtr

    Is it wrong to use a single (common) groundwire attaching accesories in series?

    ... Or do I actually need a ground buss as well as a positive one? The ground is 14 gauge wire ... I just got this boat, and the after-market wiring is all screwed up. whoever did it before me used a common in series on the bilge pump and the TWOLED flood lights. (the bilge pump was actually...
  8. madhtr

    Ello Iboats!

    Eagle V :)
Top