Search results

  1. zippy83

    Bent skeg on outboard

    Hi all, I was drifting down the wind and hit a log with my outboard. Even though it was trimmed up it was hard to see and the result ended up being a bent skeg. Is there a way it can be bent back?
  2. zippy83

    Water in the powerhead

    Hi all, I have a 2021 mercury pro xs 200 and during my last oil change I noticed that there was some water in my oil. For the first 10-15oz the color of the oil was milky and then te rest of the oil looked normal (dark brown) I took it to the service and they told me that its NORMAL for some...
  3. zippy83

    Outboard life expectancy

    Hi all, I always wondered if a outboard is well maintained how many hours can be put on one? When I was searching online for an answer I found some enswers to be anywhere from 750 to 1500 hours. Seems a bit low in my opinion. I have a 2021 mercury pro xs 200 with 120 hours on it. What can I...
  4. zippy83

    Broken Skeg

    Hi all, I have a 2021 200HP Mercury pro xs.. I recently hit a rock and broke off my skeg. I know there are options to weld on a replacement skeg, but I would Rather do an insurance claim and get the lower unit replaced. Any advice other then watch where you going? Thanks Zip
  5. zippy83

    Deep Cycle battery polarity issues (24v)

    Hi Everyone. I have been having polarity issues with my 24v trolling motor system. I got a brand new boat in 2021 and 12 1/2 months later I had my first factory battery issues (not covered by warranty) with polarity being reversed. Someone here mentioned to change out both batteries in fear...
  6. zippy83

    Mercury PRO XS200 Tune

    HI all, I have seen somewhere where someone talked about tuning the Pro XS V8 models from 200HP to 248HP without having to change any parts out... I was told that the 200/225 models have the same exact parts, and that the 250/300 models only have a different throttle body to allow more air...
  7. zippy83

    Need a new Battery for 24V System

    HI All, I have a 2021 boat that came with a 24v trolling system. One of the batteries have crapped out and I need to replace it. What I currently have is a srm-27 CCA 600 RC 160 Currently I cant find that battery near me in stock (shocker) What I can find is another battery in the same size...
  8. zippy83

    Question about engine oil

    Hi All, I have a new 2021 Mercury PRO XS 200 and I just got my oil changed (I did it myself). The manual states to use 25w-40 or 10w-30.. I went with the 25w-40 but recently one of my fishing buddies told me that his service said if you live in an colder region not to use the 25-40 and go with...
  9. zippy83

    Oil type for my new pro xs

    Hi all i have a new 2021 mercury pro xs 200 four stroke and I am getting ready to change the oil on it after the first initial 20 hours. I am confused on the oil type however. The manyal states 10w 30 and it also states 24w40 synthetic blend.. What do you guys recomend? thanks
  10. zippy83

    Min Kota iPilot foot pedal

    Hi All, My new boat came with a standard 75LBS Min Kota Powerdrive trolling motor. I then got a kit from ebay that allowed me to convert my existing head to an iPilot head thinking having all the cool gps features would be worth the upgrade. And I enjoy the features alright however when you are...
  11. zippy83

    Disconnecting Fuel line from the outboard

    Hi All, I have a brand new Mercury ProXS 200HP and I am getting ready to install the rigging tube from the motor to the hull of the boat. In order to do that I have to disconnect a lot of cables from the motor (majority electrical) but I was wondering when I disconnect the fuel line and...
  12. zippy83

    Outboard Flex Tube

    Hi All, I just got my hands on my new boat and motor and I was wondering if anyone knows where I would be able to find some 2" flex tube so I can tuck in all the cables that are going out of the outboard into the boat. I have attached a picture... The dealer sells it for a whooping $410.00 for...
  13. zippy83

    DTS Controls or no DTS Controls

    HI all, I am getting ready to purchase a new boat and motor and the motor I was looking at comes with an option to add DTS Controls for an extra $1500. I have done some research and know that it's Digital Throttle response system and that it's very jumpy. My current boat is a 50HP and is cable...
  14. zippy83

    IDLE Adjustment

    Hi All, I was wondering if someone can help me figure out how to adjust my idle. I have a very old 1973 Mercury 2 Stroke 50HP outboard. It has been running like a champ for the past 47 years but recently it has been stalling when I turn it on and when it sits in idle for more then 2 minutes...
  15. zippy83

    1973 Mercury 50HP Thunderbolt 2 Stroke

    Hi All... I am getting ready to sell my boat and motor but where I'm getting stuck is the value of the outboard. I'm not joking when I say this but this outboard turns on the dime don't matter how long it has been sitting. I just had it sitting for 6 months due to this COVID crap and turned on...
  16. zippy83

    New boat question

    HI.. I'm looking to get a brand new boat.. Looking to get a Tracker v19 Targa Combo. Standard boat comes with a 150 Mecr 4 stroke but the dealer is insisting to upgrade to a 200 for additional 6k. The boat has a gallon gas tank and weights about 2250LB. Is the upgrade worth the $$? as for speed...
  17. zippy83

    New Boat purchase question

    HI all.. I will be in a market of buying a brand new boat. I really like the new full aluminum deep V tracker boats 19' with a 200HP outboard. The only dealer I really have around where I live is the Tracker Store and Bass Pro. So my question is can you go to them and negotiate a price like...
  18. zippy83

    Question about boat cover repair

    Hi All, I just found out that I have a big rip on my boat cover two days before I leave for Wisconsin on a fishing trip. This rip is pretty big, it almost seems like someone took a knife and cut a peace of it out. It is about a 5" x 5" hole. what is the fastest way to patch this up? I would...
  19. zippy83

    Trim Motor

    HI All, I really don't know what type of trim motor do I have... A few years ago I wanted to install a trim motor on my 1973 Mercury 50HP. I took it then to one of the boat shops in the area and he installed what then seemed to be a good working (used) trim motor. I have used it for about 5...
  20. zippy83

    Plywood sealer

    HI All, I am re-doing my decks on my boat and will be using 3/4" plywood. I know not to use pressure treated plywood on aluminum hulls so my question is what would be the best product to seal the plywood for maximum durability? I know there are sealers and stains you can get from Home Depot...
Top