Search results

  1. R

    Evinrude power pilot hard wiring to Evinrude 28 hp SPL HELP

    I'm trying to hard wire my motor to the control box instead of using the red connector plug because the wiring is all bad in the plug side of the motor. I'm having trouble matching wires to each other. Only two wires a yellow one going to the solenoid and a white one o the control box. I think...
  2. R

    evinrude 50 hp sizzler with liquid coming from coil when hot

    my engine when it gets warmed up dark fluid that is black comes out from under the flywheel and when it cools it gets hard also Ive noticed when it gets warmed up it looks like gas oil mix leaks from under the engine and runs down the shaft It has a rough run and doesn't idle good I have to...
  3. R

    Eagle fisheasy not working

    my fish finder is not working it hasn't sense I got the boat but the original owner has passed and I have no manual to it there is a wire that doesn't go to anything that looks as it should go to something and also there is one going back to the sonar and then one going to the battery sometimes...
  4. R

    1988 evinrude SPL 28 hp problems

    my motor has an issue and I don't know what it causing it when I crank it it runs good but then wants to die after a few seconds and I can put the choke on and it will rev back up when I let off it and then it will start to go dead again and I can do the same thing and it work any suggestions...
  5. R

    evinrude 1988 28 hp SPL questions

    i have a few questions on my newly received motor im not to great with boat motors but im getting there there is a nob on the front of the carburetor im assuming It would be to make it run less rich or more but im not sure does anyone know what it does and also where can I get the gasket...
  6. R

    1988 evinrude spl 28 questions

    I have something on my motor that I noticed and I just got the motor so not familiar with it it has a red nob on it and it is connected to the fuel line and carb thinking maybe something to do with the electric choke idk though also some of my wiring has some corrosion on it should I replace it...
  7. R

    evinrude SPL question

    I have just aqired a old 1970 terrybass boat with a evinrude SPL 28 hp engine and it has a wired marking on the side where the fuel line goes and I was wandering what it means and if anyone could help me out on finding the year of it the model number is:E28ESLCCR thanks cr
  8. R

    anyone know anything about my terrybass boat

    I have just acquired a terrybass boat that was a good friend of mine who passed it is fiberglass blue and white but I know nothing about his wife said he bought it a long time ago and kept it in the garage until last summer and he took it out to use it but got sick and never recovered the card I...
  9. R

    progress done so far on my 1967 sears runabout boat

    a while back I think back in 2011 I bought a 1967 sears runabout boat from a fellow it was in sad need of restore it had been setting full of water for so long that the floor and transom had become weak so I took on the project of doing the floor first I checked all the stringers and they were...
  10. R

    questions about my boat and some spots on the finish

    I have a 1967 sears runabout fiberglass boat and im replacing the transom and ive always noticed some small hairline lines in the boat hull in a few places and im wandering what they are from and what I could do about them or if they are something to worry about all the gelcoat is gone and im...
  11. R

    repairing my transom on my old sears runabout boat

    im replacing my transom on my boat and I messed a little piece of the back when trying to remove the wood and im wandering what would be the best way to go about fixing it ill post some pictures thanks cr
  12. R

    transom plug seals

    I'm replacing my transom but I'm wondering where you can get the metal rings the drain plugs go into that are embedded into the transom
  13. R

    what do i need to get to fix my old style stearing

    i have a 1967 sears runabout boat I a 1975 evinrude 50 hp sizzler motor but the problem is the two wheels that hook to the motor and turn it are needing to be replaced and I have no idea what they are called or where to get replacement ones and also I need to know what hooks all this to the...
  14. R

    boat preformance question

    I have a 14 ft sears runabout boat and it has a I believe a 20 transom but I also believe I have a motor with a shaft too long it is a 50 hp evienrude sizzler ive been told it looks to long in my pictures but ive had it out quite a bit and it seems to handle great and smooth with no problems my...
  15. R

    How should i go about trading my motor for something smaller?

    I have 1967 sears runabout boat and it is rated for a 45 hp right now. I have a 50 hp 1974 evinerude sizzler on it and I believe its a long shaft and it seems to be to heavy for my boat and maybe to powerful for it too. I'm not sure what I would need to make it powerfull enough. I've heard 45...
  16. R

    what size prop do i need for my boat

    I have a 1967 sears runabout boat and it is rated for a 45 hp I currently have a 50 hp evinrude sizzler 1974 model it came off a pontoon boat and runs great but I think its a little heavy for the boat but im not sure any help would be helpful thanks cr
  17. R

    what king of control box do i need???

    I have a 1974 evinrude sizzler 50 hp and I have no manual it runs great crossing the starter out but I have no control box and I see there are so many and im not sure what model or one I need I was wanting one with the ignition and choke separate so I could put them in my dash but I don't...
  18. R

    running a motor in a 55 gallon drum how long

    ive always wondered how long could you run a outboard motor in a 55 gallon drum because I know the circulation Is not as good and the water tends to get oiliey any thoughts on this subject would be nice thanks cr
  19. R

    old sears red fiberglass runabout boat questions

    ive had a boat that I was told when I bought it that it was a 1967 sears runabout boat its red and 14 ft but it has no seats somebody tore them out I was wanting to redo them some what close to original but I cant find out much on these I was wandering if anybody had ever had one and maybe had...
  20. R

    1974 evinrude sizzler 50 hp help

    I just bought a 1974 evinrude sizzler 50hp and I don't have the control box with the ignition and choke but ive heard that you can start it with out it but im not sure how when I hook the battery charger to the solenoid it gets fire to both sparks good but doesn't seem to turn it over very...
Top