Search results

  1. W

    river runner skeg and prop guard???

    Has anyone ever used this? And if so, is it any good or worth the price tag on an old kicker?
  2. W

    Throttle slipping on 9.5

    When I idle or wot in both neutral and in gear the throttle wants to turn itself down to the off position. My 6hp stays right where you put it. Why is this happening? When I rebuilt the ignition I tooke the throttle linkage apart and didn't tighten the pivot bolt down too hard. Is this my...
  3. W

    prop pitch P/N's

    Walley,<br />I could not respond on that other thread but can you tell me where to look for that P/N on that 9.5 prop. Thanks, -woody74
  4. W

    9.5 starter mod...

    I think that since I have to get a whole new starter assembly for this motor that I may take the old one and try to modify it to an electric drive. I figure that all I really need to do is find a good 12v motor with the right amount of torque and fab a mount to the bottom of the mount plate for...
  5. W

    Prop Q for 9.5 jrude...

    I have a '69 jrude 9.5hp with a three blade prop. I also have a '66 erude 6hp with a two blade prop. I know these two will physically intercahnge but will the three blade prop put too much strain on this 6hp motor. Will I see any performance gain or loss. Any help is greatly appreciated...
  6. W

    johnson 9.5 prop question

    Can I run a 3 blade prop from my '69 jrude 9.5hp on my '66 erude 6hp? I know it fits but will it put too much strain on the 6hp? The 6hp only has two blades. Will this give me any performance gain or loss? I know this isnt a repair thread but it is a trouble thread. Hope Im not posting this...
  7. W

    evinrude vs johnson

    I have a 66 evinrude 6hp on a 14' jon boat that looks factory new. I also have a 69 johnson 9.5hp that I just rebuilt on an 12' jon boat. I like the 14' boat but am torn as to which motor to run on it. I am selling the 12' boat and one of the motors to a friend. The 6hp has NEVER given me...
  8. W

    evinrude vs johnson

    I have a 66 evinrude 6hp on a 14' jon boat that looks factory new. I also have a 69 johnson 9.5hp that I just rebuilt on an 12' jon boat. I like the 14' boat but am torn as to which motor to run on it. I am selling the 12' boat and one of the motors to a friend. The 6hp has NEVER given me...
  9. W

    need a starter for '69 9.5

    OK here is the deal, Ive almost completely rebuilt my johnson 9.5 but I desperately need a starter. I snapped the whole recoil spring and inner shaft in two. I bid on ebay for one but lost and now that same exact one is up again for bid by the same seller. I emailed him and asked if that was...
  10. W

    high speed needle for 9.5?

    Im sorry to be an idiot but where is that high speed adjustment made on a 69 9.5?
  11. W

    how do I replace and set points on 69 jrude 9.5

    I talked to my local mechanic and he said if I only have one cylinder firing to start at the points and work my way to the plugs. Well plugs are new....so. I got new points(inexpensive so why not) and I need to know how I go about setting them to .002 or whatever the flywheel says. I know I...
  12. W

    One cylinder only in 9.5...

    My 68 johnson 9.5 is only running on one cylinder apparently. I say this b/c I pulled one plug while it ran and it kept running and then reattatched the plug wire, then pulled the other and the motor shut off. I fired it again(all onnected) and it ran but still only on one cylinder. Where do...
  13. W

    need new johnson 9.5 hp starter (pre '74)

    It is my understanding that johnson 9.5's from mid 60's to early 70's did not change much. If I am wrong please correct me. Anyway, I need a new pullstart spool and spring assembly. I wound my old one a little tight to say the least. As you can tell I am not a boat mechanic but I love to...
Top