Search results

  1. S

    1966 33HP eveinrude. Fuel Problems?

    I have a 1966 33hp evinrude. I rebuilt the carb this spring and don't think it was ever right. The motor would run somewhat good with both the high speed and low speed adjusters all the way in and would run like crap with either unscrewed a little bit. Last time out it ran like it did all...
  2. S

    1968 40HP Carb work on a 1966 33hp?

    I found a brand new evinrude carb for a 40hp 1968 evinrude. It looks the same besides the 1968 has a fixed high speed jet and my 1966 has a adjustable high speed. Will the one with a fixed high speed work on my 1966 33hp?
  3. S

    1975 V6 Volvo-Penta overheating

    I got a 1975 V6 Volvo-Penta overheating. Is there two water pumps on this? Should I replace both if so. I replaces the one on the front of the motor about 7 years ago. What are the part numbers of the impellors ect that I will need. Thanks a million for the help.
  4. S

    Two motors running at same time cause trouble?

    I have a 33hp 1966 motor that I have on my 17' boat. It doesn't go fast enough to slam into the waves. If I start up my 7.5hp kicker it really makes a difference and gets the boat moving. Will it hurt either motor having them running together? They both pump water while moving.
  5. S

    Replacement fuel pump for a 1966 33hp Evinrude?

    What replacement fuel pump would work for a 1966 Evinrude 33hp? Thanks
  6. S

    1966 33hp Evinrude. Carb problem?

    I have a 1966 33hp Evinrude. I bought this motor this spring and connected it to the boat. It didn't want to run so I rebuilt the carb. (First time ever rebuilding one so not 100% sure was done right). I tested it in a river and it didn't have any power. I had the low speed out 1 1/2 turns...
  7. S

    1966 33hp Evinrude. No power. Stalls at full WOT

    I have a 1966 33hp Evinrude. It wouldn't run when I bought it so I rebuilt the carb. It now runs good at idle. When I have it under power it will run good in idle. When I open it up it doesn't have much power. I noticed it runs almost the best when the high speed is set all the way in or maybe...
  8. S

    fuel pump rebuild number? 33hp 1966 evinrude.

    I need the part number for a 33hp evinrude fuel pump kit. Thanks
  9. S

    1966 33hp choke shorted. What to do?

    Ok so last night I got all my wiring done with a new switch and found out my choke is shorted. If I move the power connecter on the choke it will work but only when you move it. Can you buy a new one cheap or what do you have to do to fix it?
  10. S

    1966 33hp carb float part number and fuel pump number.

    I found the carb kit on iboats but it doesn't have the float. Anyone know the new OMC number for the rebuild kit and also the number for the fuel pump rebuild kit? Please let me know. Thanks Steve
  11. S

    kill switch wires for 66 33hp evinrude?

    I have a 1966 33HP evinrude motor. I figured out everything besides the two wires the guy I bought it from said was kill wires. How would I wire them so when I turn my switch off it kills the motor. My switch has three prongs and its off, on and start. There are two black wires on the motor and...
  12. S

    kill switch wires for 66 33hp evinrude?

    I have a 1966 33HP evinrude motor. I figured out everything besides the two wires the guy I bought it from said was kill wires. How would I wire then so when I turn my switch off it kills the motor. My switch has three prongs and its off, on and start. There are two black wires on the motor and...
  13. S

    Where to find a water pump kit for 66 33hp evinrude?

    I got a 33hp 1966 Evinrude I need a water pump kit for. Anyone know where to find one from? I can only find the impellor. Thanks Steve
  14. S

    Oil Mix for a 66 33hp eveinrude?

    is it 50:1? What type oil would be the best to use? Is this a two or four cycle motor? Thanks
  15. S

    1966 Evinrude 33 hp Ski Twin water spout?

    Is there a way to monitor the temp on this motor or a way to add a water spout to make sure it is pumping water? Thanks Steve
  16. S

    1966 Evinrude 33 hp Ski Twin wiring?

    I just bought this motor and need to hook it to the power. It has the spot for the hot wire on the starter. I am guessing I ground it also on the motor. So I will run the ground from the fuse box, the hot from the solenoid to the starter post. There are two wires that are on the side that the...
  17. S

    1964 Evinrude 75HP overheating help please

    I have a 1964 evinrude 75hp v4 motor on my 17 foot boat. I was on the lake and the boat was not plaining out. I had alot of weight on the boat so I thought it might just be taking awhile to plain. The all of a sudden the motor shut down like someone hit a kill switch. I felt the motor and it was...
Top