Search results

  1. S

    Shifting into reverse problem Nissan 6 horsepower four-stroke

    Thank you I took your advice adjusted the reverse coupler and now it works like a champ
  2. S

    Shifting into reverse problem Nissan 6 horsepower four-stroke

    So we inherited this engine it's in pretty good shape cosmetically we're trying to get it running good but once we have it I linked it'll shift into forward but is grinding gears going into reverse and won't go in. When the engine is off if we turn the propeller while trying to shift into...
  3. S

    Shift rod issue

    I figured it out took a little finagling
  4. S

    Shift rod issue

    When servicing the water pump and attempting the reassembly of the lower unit we had the lower shift rod in the wrong position once we figure that out and took the lower unit back off now the shift rod doesn't engage anything inside the gear case it just spins and only moves up and down about an...
  5. S

    Electrical Issues

    I think the wires are connected correctly because the radio was working before I left the boat alone for a couple of months... I'm going to try the other thing that you say that makes perfect sense thank you I'll let you know what I find
  6. S

    Electrical Issues

    Okay here's what I have I tried disconnecting the battery charger didn't change the alarm situation. Inline fuse for the radio is on the yellow battery wire there is also a red ignition wire going into the radio. Whenever the battery switch is in the on position the inline fuse blows on the...
  7. S

    Electrical Issues

    Thats a good question!, now I am going to run home and check it out! Thank you.
  8. S

    Electrical Issues

    Chapparal 204 SSI 4.3 GXI E engine, now have an alarm that will not stop (replaced the alarm and an oil pressure sensor, all guages are normal and working) Now new issue have found that my new Boss radio amp continously blows 15 amp fuses..... the only thing that happened before this all...
  9. S

    Alarm won't turn off Volvo 4.3gxi

    Okay here's another update I replace the oil pressure sender that was broken and the audible alarm unit. The alarm is still running continuously. The only thing that I did was replace a bad battery charger before I try to get the motor up and running does anybody think that could cause this...
  10. S

    Alarm won't turn off Volvo 4.3gxi

    Another update I checked under the dash and I located the audible alarm so I know where that is when that fails does it fail to the beeping state is that possible
  11. S

    Alarm won't turn off Volvo 4.3gxi

    Update checked temp sensor near thermostat removing g that did not silence the alarm.
  12. S

    Alarm won't turn off Volvo 4.3gxi

    So I had my chaparral boat with a Volvo Penta 4.3 gxi the sitting for a couple of months and then when I went to start it up the alarm sound that turns on when you turn the key and it's supposed to turn off when the engine starts would not turn off. All gauges work and we're reading normal...
  13. S

    VP 4.3 GXI. How to replace throttle handle tilt trim switch

    I cannot find this anywhere. The spring has gone so th switch doesn't return to mis position when moved up or down. I have the switch coming but how do I get to it. Is is a side mount chaparral 204 said 2004. Thanks
  14. S

    Fisher Avenger 14 wiring question

    I am working on a 2005 Fisher Avenger 14. There is no battery switch, bus bars etc. Does anyone know how the ground wires come together and end up at the battery? Trying to work with existing harness and not replace it all. I haven't been able to find a schematic anywhere. There is a...
  15. S

    Need ID Please

    https://www.facebook.com/marketplace/item/712514445838026/ hoping this like will work Can anyone ID this for me? They say starcraft but I'd like to know year and model thanks
  16. S

    Tilt trim down quits randomly

    4o hp merc 4 cyl 1997 occasionally the trim down will not work and will always trim up but the button on the motor and the button on the remote control will not work for trimming down. I can switch the wires inside the engine reversing the polarity to the motor to get it to go down but not up...
  17. S

    Upper end cap oil seal blowing out?

    0G369283. Merc 40 hp 30 jet 4 cyl 1996. Was having a problem with an exhaust leak so took off the flywheel down to the flywheel shaft and what I saw was the upper oil seal loose it had worked itself out of place. I reseated it it seemed to go in nice and tight it was not damaged. That was the...
  18. S

    40 HP 30 jet dies with cowling on

    0g369283. Have the problem where the engine wouldn't run with the cowling on I detected some water leakage at the bottom part of the powerhead I removed the powerhead and replace all powerhead and middle section gaskets I replaced the studs and the correct nut reinstalled the power head. Engine...
  19. S

    Upper oil seal leak?

    1996 40 hp 30 Jet....have the classic symptom motor wont run with cowling on....replaced all lower gaskets. Now when it runs I have oil leaking down from the top and the exhaust leaking from upper seal under flywheel smells strong and burns your eyes. Anybody ever heard of this? What's the...
  20. S

    Merc 40 4 cylinder 1996 exhaust troubles

    I reworked some stuff in the powerhead then when I attach the powerhead it was leaking water at the bottom seal I tried retorquing it it was still leaking I took it apart and put a new gasket and it was still leaking eventually I put some RTV on the gasket surfaces and it stopped leaking water...
Top