Search results

  1. D

    57 rude 65 LE Advice

    Putting together a 1957 Evinrude Big Twin. I purchased a lower end pin drive from ebay off a 33 hp 65 Johnson. Question is what prop should I use. I have been looking for a part number, but no luck. Thanks
  2. D

    Johnson TD 20 and HD 20 Concerns

    With my FD 11 set aside I decided to start on the TD 20 and HD 20. As I do not have a parts manual for either of these motors, I was hoping the pros here can help. Looking for the prop shaft seal part # for the TD 20. The # on it says 543870 which brings up no info. I would like to also replace...
  3. D

    First Boat General help

    I picked up a 14' Starcraft Kingfisher and trailer. The guy who had the boat before must have had a real small motor because he cut a square out of the transom. Its about 6 inches down and 12 inches wide. Is this a easy fix? Will it still hold the 30hp it was rated for? What can I do to repair...
  4. D

    Johnson fd 11 lower end issues

    I figured I'd bring this back to the pros here. Since you guys did help me alot with getting my motor running, I thought I'd search for your help once more. I decided to check the lower end after having so many problems trying to get it running, figuring that maybe the guy that sold me the motor...
  5. D

    Fuel Pump Conv. fd11

    I have looked for a sticky how to on this. Anyone have a link or a step by step. Like to change my fd 11 so that my plastic one line tank is universal. I really don't know where to start or what needs to be plugged? Thanks
  6. D

    Old Techumseh Jet Help

    My friend found this old jet. I cannot find any info on it what so ever. Any help would be great. Model: AV81 Serial: 3741134 Type: J55-B
  7. D

    Newbie 57 FD 11 Backfires

    I just picked up a few old johnson motors from a friend. I am really having issues with my 57 fd 11. I wanted to make sure that the carb, tank and lines were in good condition, I replaced the coils and points, ck'd and gapped at 0.20. I wanted to make sure that most of the motor was in good...
Top