Search results

  1. D

    Mercury 1987 20hp will not run

    Yes I have , I have a 25 hp a little newer but same concept . So I switched coils and wires . Didnohma reading on stator and trigger . Stator seems to be a little lower . So I orderd a new one . But spark at coil does not reed high . Can someone tell me what type of voltage I should be looking...
  2. D

    Mercury 1987 20hp will not run

    Yes I have . No change . I even thought of maybe someone out the coil wires on wrong . So took off fly wheel and everything looks good under it. Did some readings off the stator. According to CDI BLACK /white to Brown/yellow should be 650-850 ohms . Mine reads 742 so good . Low speed should be...
  3. D

    Mercury 1987 20hp will not run

  4. D

    Mercury 1987 20hp will not run

    So I have a spare tester . I set it to 1 inch spacing and tested spark. Was all over , put it to 3/4 it was a lot better . I put a straw in cyl 1 turned it till it was TDC . Then I looked at the flywheel it was on the two dots so the book shows that as setting the base time. As for the link...
  5. D

    Mercury 1987 20hp will not run

    I have a 20hp Mercury. I have set the timing on the motor. Cleaned the carb. I have 140psi both cyl. I have great spark. Will jump 3/4 or 1 inch gap. I did an ohms readings on coils compared to my 25 . They are in spec . I spray starting fluid in carb buttterfly open , then turn key it fires...
  6. D

    Johnson 30 hp

    Thank you
  7. D

    Johnson 30 hp

    Yes I do push the key in for the choke ? But it is not clicking. So I need to check to make sure it is getting voltage . That is my first attack for that. As for the carb . I had a 25 johnson and the low speed idle was in the front top center. But the 30 carb says it is a plug . So just screw...
  8. D

    Johnson 30 hp

    So I think it may be a 1987 by decals . But I could the number plate . So I can buy parts for carb etc… It is an electric remote ? If you need more ask please
  9. D

    Johnson 30 hp

    Here they are Appreciate the assistance Dale
  10. D

    Johnson 30 hp

    I just got a 30 hp johnson . The problem is the tag is missing from the frame. I did find the welsh plug with the numbers stamped on it . But it does not seem to help me . I can’t find anything B171608 The carb throws me too has an adjustment for screw at top this only adjust when in gear I...
  11. D

    Suzuki Identification help DT9.9

    Thank you , always appreciate your help....
  12. D

    Suzuki Identification help DT9.9

    Thank you, i found that on the site too. but i could not get info that matched what my tag had on it. ill look tonight again at the tag.
  13. D

    Suzuki Identification help DT9.9

    I just picked up a Suzuki DT9.9 I got the motor up and running. but there is no hood for it. i read the plate, but i cant seem to get a clear answer on how to disifer it. maybe someone can tell me SUZUKI DT9.9 00993 728703 need the year so i can find a hood for it. thanks Dale
  14. D

    1974 Evinrude 25hp wont run.

    so after alot of trial and error, it is up and running. alot of time and questions, but you all contributed to the cause and she runs like a champ. good news is, two young boys were looking for a motor for there boat. so i have 2 25 hp motors one for my boat that all of you helped me get...
  15. D

    1974 Evinrude 25hp wont run.

    So today I took a little time off. I beleave it was RACERONE who made a suggestion but made it simple when the motor is running is gas pumping out of fuel pump. Well I tested this theory . No it is not . So I took the papers that were sent to me , was about someone’s rants great info. Built the...
  16. D

    1974 Evinrude 25hp wont run.

    That is an illusion that happens when you video. The motor is running in the correct rotation. Hoping to work on the fuel issue this afternoon. Mothers Day. So have to play by ear.
  17. D

    1974 Evinrude 25hp wont run.

    My gap is ok, my motor ran till I changed multiple iteams. Then it was put to me plain and simple . Do you have spark , do you have compression, do you have fuel . So the one item I can’t guarantee till the weekend is fuel making past fuel pump. So that is my quest when I fix that I will see...
  18. D

    1974 Evinrude 25hp wont run.

    Well I have about 4 metal Cans . So I will look inside the metal Can make sure clean and get gas and try one. Thanks for the idea. Quick and simple . So one day this week, overtime work all week. Thanks for the help all Dale
  19. D

    1974 Evinrude 25hp wont run.

    Will try that one day this week, I also will try buy putting the hose directly in the tank and bypassing the connector and hose In tank. I will report back when I try these two ideas. Thanks as always Dale
  20. D

    1974 Evinrude 25hp wont run.

    Thanks, as for pressure from crank, if you run the motor with out blocking the hole for the pulse, you can hear it and you can feel the pressure. So i don’t think it is that one. All gas related lines are all changed. Accept the line in the plastic fuel tank. I will try using a gas line just...
Top