Search results

  1. P

    Steering Stiff only near center

    I have a 1990 Lund Pro V with a side console and a 120 hp Evinrude. I've had it for a year and the steering has been this way since I bought it. It is VERY stiff about 10 degrees left and right of center. It takes two hands to turn the wheel. And its a real wrestling match landing and...
  2. P

    Steering on 1998 Lund Pro V 1800 is stiff coming out of center.

    The steering has been this way since I bought it used. The problem is that the steering is really stiff going left or right from center, one you start to turn it gets "normal"/easy all the way to the stop and coming back again. But as you approach center it gets stiff again. I've...
  3. P

    90 hp 1984 Evinrude low power at WOT.

    I've been working on this motor for several months trying to get it to run. Here is what I know. It used to run pretty good. Rough and not very dependable but it would get the boat up and plane at WOT. This is what its doing today. It starts really hard, and very cold blooded. Needs...
  4. P

    1984 Evinrude 90 hp has no ignition

    This motor has two problems. One old and then this new one. The old one was I couldn't get it to run at high speed. Acted like it wasn't getting enough fuel. The new problem is. I was out on the lake trouble shooting the old problem when for no apparent reason the ignition switch would...
  5. P

    1984 e90mlcrd going from oops to worse. Really need some help here

    Bought this boat and motor about a month ago. Did some minor prep on it, replaced fuel, new battery and it fired right up and ran. It idled a little rough and hard to start and keep running, but when at WOT ran pretty smooth. The other day the remote control took a crap on the lake I took...
  6. P

    two different kinds of coils

    According to what I could find online and what the local parts guy is telling me. The coils that I have on my 1974 90 hp is no longer available. I have two different kinds on it now. Is that going to be an issue?
  7. P

    sealant on fuel pump?

    1984 90 hp evinrude fuel pump started leaking., I took it apart and it looks fine. I'm wondering if I can put a sealant/rtv on it before I put it back together? Any ideas ?
  8. P

    working on a 1984 90 hp evinrude.

    Got this boat off craigslist more for the boat than the motor so when the motor ran that was a big plus. Got it home, pulled the plugs, sprayed the cylinders, drained the gas, put it back together new gas and it fired right up. The VRO oil hose had been cut off and there doesn't appear to be...
  9. P

    1972 Evinrude Starflite fuel and timing question

    I got the motor a few years back because no one could get it running right. I worked on it for a while, think about it for awhile, work on it for a while and think about it somemore. Anyway. The entire ignition system was replaced before I got it. Everything from the distributor, wires...
  10. P

    100 Evinrude starflite irratic ignition

    I got this boat from my brother in law. Here is the story. He skis barefoot so needs something pretty fast I guess. Anyway. He took the boat into the local boat motor repair place because it started missing at high speed. As far as I know that was the only problem. The shop...
Top