Search results

  1. Y

    Trim and tilt not working

    I recently had to remove my boat from the trailer, so trimmed the motor up as high as it would go as I was putting the boat on the grass Anyway got the boat back on the trailer and went to lower motor but it's not moving Motor is working on the trim, but ram refuses to move It's a 60 evinrude
  2. Y

    charging system 70hp evinrude 1996

    Needs some help the wire from rectifier is in the wiring harness coming from the motor, but do not go to battery as i would have thought. It appears to go to the ignition and wires from ignition go back to batttery Would it charge the battery?
  3. Y

    70hp fuel connection

    hi guys What is the hose connection that is directly under the fuel line connection on a 70 hp evinrude there us the nirmal 2 pin connection and under it us a hose connection that will take a 3/8 hose
  4. Y

    What a joke

    What's with this forum, I have started 3 new threads with genuine concerns about a motor with not one reply I thought the forum was here to help people.WRONG
  5. Y

    Ver hot water coming from tell tale F50

    Hu Guys Just a queery, just fitted a F50 2009 tp my boat, started it on the muffs, water was luke warm coming from it I increased the revs slightly to see if telltale increased and the water got that hot that I could not keep my hand under it. Could this be lack of water going through the...
  6. Y

    Tiller on a 50hp 4 stroke

    Hi guys Help me out, please Just put a tiller handle on a 50hp 4 stroke 2009 Was wondering what the 2 smaller cables with connections were for I found the other 2 terminals on the motor where I presume they go Should they be connected and what are they One of the terminals on the motor was...
  7. Y

    2008 50hp 4 stroke need advice

    Hi Guys I need some help in making a decision I have the opportunity of purchasing the above motor, the problem is I need to travel 650klms to have a look which isn;t a drama. My concern is that the boat has been sitting on the transom of a boat in salt water for the past 2 years, it has daily...
  8. Y

    1200 hours on a 2 stroke

    What are your thoughts on a 50 hp 2010 2 stroke, with 1200 hours would it be better being scrapped or would it have some life left Cylinders have 110psi
  9. Y

    1988 Mercury 60hp Trim and tilt

    Hi Guys Just a quick question, I have a mate thats having trouble with his trim and tilt, it will not trim under load. The unit works fine out of the water but once in and under way ceases working. He has replaced the seals but that done nothing, could it be a low il level? If so where should...
  10. Y

    Yamaha 40hp 4 stroke problem

    Hi guys, Hope you can help me out, I have a 40 hp 4 stroke yamaha 2005, it appears to have a noise (rattle) in the lower leg about 250mm or there abouts above cav plate, not there when in neutral but very noticable in forward and reverse, the noise appe to go out when revs are higher but not...
  11. Y

    Yamaha 2005 40hp 2 stroke

    Hi, Just a couple of quick questions I'm after a flywheel for the above motor and can't seem to locate one for this year model. Will other year models do the job. Secondly Would this motor have a rectifier attached from factory or would I need to purchase one. Its just that there are 3 wires...
Top