Search results

  1. A

    will a lower unit from a 1979 100999s will fit a 1998 115 evinrude??

    when i lowered the motor from its stand , oil came out the prop!!! so im thinking a seal is bad and i have a lower unit that doesnt leak but is froma 100hp 1979 evinrude
  2. A

    carb problem

    after putting my e110tlcca 1988 together with the carbs from a 100999s 1979 and the electrics from same 1979 motor , i got it to run but it doesnt start every time unless i mess with the carb linkage , and when it does run is verry erratic and it spits fuel out from the top carb, and spark plugs...
  3. A

    trim issue for an evinrude 110 hp 1988

    when i removed the whole assembly to put my force motor up i cut the cable coming from the trim to the powerbox .now i put the old assembly back and i connected blue to blue green to green but i didnt connect the black and i put it straight to the battery but it wont work (it was working before...
  4. A

    ok i got my `88 110 evinrude to run , but i have a problem

    right under the fly wheel where is that marker , that look like a arrow , sticks out is pretty sharp , when is running i she a spark , blue spark , and fume is coming out the carb and it makes a noise like it spitts!!! why would i have that spark where the top bolt goes in
  5. A

    i need major help(not psychiatric :))) ) with a 1988 e110tlcca pls pls

    ok this is my story so u can understand what exactly happen: i had a ranger vip witha 90 hp that got stolen ,i bought a motor for spares a 110 evinrude , i took different things from it like the carbs , bolts , small stuff. after that boat got stolen in 2011 i bought another one with a 100 hp...
  6. A

    almost 90 psi in all 4 on a 110 hp evinrude , or a default meter not sure

    how bad is almost 90 psi in all 4 in a 110 if the meter was corect
  7. A

    hi , where do i connect the cables from the battery

    to the solenoid on a 100999s a 100hp evinrude
  8. A

    force 70 hp 1992 turns over but wont cycle!!!!pls advise

    had an evinrude 100 hp that trew a rod , exchange it for this 70 hp , wasnt in use for 2 3 years , i had no problem starting it , it ran fine for 2 days , went fishing with no problem .on sunday after 2 days i use it , i ran out of gas , i took the boat out went got gas . mix it, got back on the...
  9. A

    100hp 1979 100999s outboard wont cycle

    it cranks up but wont start , wont cycle.i check and change spark-plugs, the new ones got wet so im assuming fuel gets to them but doesnt make combustion, it overheated it couple time the engine, i have issues when i start the motor, i have to push the choke towards the back crank it couple...
Top