Search results

  1. B

    2004 Sea Hunt Triton 186 Gas Tank Question

    Hello I have a 2004 Sea Hunt Triton 186 with a 58 gallon gas tank, and I need to replace the fuel sending unit. I understand that I need to measure the height of the tank from the bottom of the tank to the opening of sending unit port. Does anyone have that measurement? Reason I ask, is that I...
  2. B

    Driveshaft O-ring keeping me from installing lower unit?

    I've done all the work on my lower unit(insert joke here). I'm trying to bolt it back up. The water tube has hit it's mark, and the driveshaft has engaged the powerhead. Shift rod is in line as well. I can rotate the motor and see the prop shaft turn. I have about 3/8" to go before it bolts up...
  3. B

    Re-assembly Questions about Powerhead Gasket, and shift rod lubrication

    I'm putting the power head back on tonight. 1.I'm putting the shift lever back in and the top of shift rod with linkage. I know grease goes in the lever. What should I put on the rod going through the housing. Same grease? 3 in 1 machine oil? Something else? 2. Do I need gasket sealant for the...
  4. B

    Question about drive shaft needle bearing cleaning on 76' 25hp Evin

    Actually 2 questions 1.I've managed to teardown the lower unit and removed the seals that I'm replacing. I don't really want to replace the needle bearing. Can I just clean it up and repack it? If so what's solvent should I use? 2.What should I look for in the pump housing that would lead me...
  5. B

    Powerhead Disconnects for1976 Evinrude 25602 25HP

    Re: Powerhead Disconnects for1976 Evinrude 25602 25HP Here is the last picture of the shift lock. After disconnecting you can pull it out through the bottom cover.
  6. B

    Powerhead Disconnects for1976 Evinrude 25602 25HP

    Figured I'd give back for the help I've received. Here are some pics of what you need to disconnect before removing the powerhead on a 1976 Evinrude 25602 manual start 25HP outboard. The manual suggests you remove a lot more. If you just want to remove the powerhead to get to the shift linkage...
  7. B

    How Do You Remove the Shift Lever/Shaft Assembly from the Exhaust Housing

    I have a 1976 25HP 25602 Evinrude outboard. I have removed the power head and the linkage to the shift rod. Should the assembly just pull out? Didn't want to force anything until I know for sure. The lever and shaft assembly are hard to move back and forth.
  8. B

    Question on Removing Power Head on 1976 25hp Evinrude 25602

    The shift lever is pretty hard to move back and forth, and I think I need to get the power head off to clean out the old grease and crud and re-lube the inner workings. Manual says I need to remove the flywheel/carb etc. The engine runs pretty well, and I don't want to mess around with that much...
  9. B

    First Post and Recent Purchase of 65/66? 14' Starcraft Marlin

    I heard this was a Starcraft friendly forum. I just bought me a 14' Starcraft Marlin. I can make out 65 as the first 2 numbers of the serial number on the plate and 66 as the last 2 numbers. Will this tell me the year? The hull looks like it has been patched before in many places with what...
Top