Search results

  1. R

    Limited Electrical Power to a 1999 Johnson 225

    Hey guys. I have a 99 Johnson 225, model # J225TXEEC There is very little power going to the engine. From the helm, the motor will not crank (nor click) and the trim/tilt does not work. When I attempt to opertate the trim/tilt directly from the engine, I can hear a faint buzzing noise...
  2. R

    Yamaha Tilt Trim on SX200TXRY

    Tilt would not go down so I towed the boat out of the water and checked the tilt fluid but it seems OK, level at the screw level. In reading thru the Yamaha tilt trim threads here, I found that the relief valve sometimes goes bad on these units so I opened the valve and let the motor down. Now...
  3. R

    2003 Yamaha 250HPDI - Your Opion Please

    Hi folks. I have an opportunity to purchase a boat with a 2003 250 HPDI with 112 hours. The engine looks clean, good compression, and has had the Oil link rod set, Oil pump kit, and Ignition coil set. The boat is priced right depending on the reliability of this motor. I've heard good and...
  4. R

    1999 Yamaha 150txrx Tachometer & Bogging Issues

    Your help is really appreciated. Motor starts up no problem and is ok up to half throttle but then it bogs down and at full throttle it dies completely. The tach works intermittently even at idle, flipping from numbers to what appears to be an "E". I checked the water separator, fuel filter...
  5. R

    1998 Johnson 250 Compression Results

    I ran a compression test but don't have the specs for a 1998 Johnson 250. The Compression results are: 1-110, 2-135, 3-140, 4-100, 5-135, 6-135, 7-135, 8-130 Can anybody confirm that the compression is ok?
  6. R

    Hit a wake and motor cut out

    Here's a good one. My Montauk has a 1990 Merc 75hp. I hit a wake. When the boat pounded down, the motor cut out. It would not start back up. I checked the gas supply from tank to carb and it seems to be getting gas. Any thoughts?
  7. R

    1996 Merc 250 EFI - Idling Problems

    The day I pulled my boat out last season, the motor idled and accelerated fine in neutral. But when I put it nto gear, it stalled.<br /><br />That problem does not exist today, but possibly related is the current problem that the motor is idling at 1500 in both neutral and in gear. I don't...
Top