Search results

  1. T

    Tracker Deep Pro V17 Transom Thickness

    Tracker Deep Pro V17 has a channel the transom fits into. It is 1 1/4" thick. I was thinking on using 1/2" plywood epoxy resin'd together with fiberglass cloth sandwiched between the sheets. Then covering all sides with fiberglass cloth. Is this overkill? How thick is the fiberglass...
  2. T

    Tracker Deep Pro V17

    I am going to rebuild the transom and decking on an early 90's Deep Pro V17. I would like to get rid of the carpeting on the side rails also. I'm not totally sure how to get the side rails off and would like to confirm before I tear something up. It looks like I need to pop the rivets and take...
  3. T

    TJ40ELESR- prop shaft removal

    I'm having trouble getting the prop shaft out. I've got the bearing carrier out but can't get the shaft out. I can pull ut out aalittle but it seems to be catching on something. Do I need to take the crankshaft out first? With the propshaft in, it's hard to get to the crankshaft nut . I've...
  4. T

    TJ40ELESR- Is lower toast?

    Lower is leaking oil. I knew there was some cracks by the prop but was hoping it was in places that didn’t hold any oil. It doesn’t appear to be leaking from those cracks. I took the lower off and found a crack where the shift rod goes up through the mid-housing. There are some rubber washers...
  5. T

    Will the Manual for the J60TLEN cover the TJ 60TLENE?

    Looking for factory manuals and I found one on eBay that covers the J60TLEN and was making sure it works for the TJ60TLENE too.
  6. T

    Resurrecting TJ60TLENE

    I'm trying to resurrect a TJ60TLENE that has been sitting for a few years. I did a compression test and #1 & #3 read 110 but #2 reads 95. I assume that means the block needs to be bored out and she will need new pistons, etc. It has spark to all 3 cylinders but not sure how strong. I used a...
  7. T

    TJ40ELESR is possessed.

    I think my motor is possessed. It runs great one weekend and then the next weekend it won’t run. It seems to not be getting fuel but i can’t see what the difference between weekends could be. I put on a new fuel pump, filter, all new fuel lines and cleaned out the carbs and it was running...
  8. T

    TJ40ELESR surges and won't idle after new fuel pump.

    The motor was running like a champ one weekend, then ran rough, wouldn't idle and couldn't get her in gear the next weekend. I put some fuel in a jar but to me it didn't look like there was water in the fuel. The fuel line into the VRO was leaking fuel so I was going to check that connection...
  9. T

    VRO Leaking Fuel

    I have a TJ40ELESR that is leaking fuel from the fuel intake line. As I was attempting to remove the fuel hose, the nozzle came off. It looks like it was designed to come off but I'm not sure. This was also the place where fuel was leaking out. There was also some milky substance around...
  10. T

    Old gas?

    About a month ago I cleaned the carbs TJ40ESELR, replaced the external fuel lines, cleaned out the gas tank, and put in a new fuel filter. The motor was running great! Last weekend me and my daughter went out and fished and ran around the lake with no problems. I went to the lake this morning...
  11. T

    1990 Johnson 40hp Wiring problems.

    I recently bought a used Tracker V17. The previous owner had taken out all the wiring from the console and "re-wired" alot of the other accessories. It was a mess. I cleaned up the accessories (bilge, live well, lights) from the stern to the console. Warning buzzer on all the time- was...
  12. T

    Johnson 40 hp not firing on both cylinders

    I've got a 40hp two cylinder. Bottom cylinder is not firing. I took the wires off while it was running. That's how I determined which cylinder wasn't running. When I took the top one off, it shocked the crap out of me and the motor died. I put it back on, fired it up, and took the bottom one...
Top