Search results

  1. C

    Aq125 exhaust bellows/hose

    I need the aq125 pn 834871 but there’s not much online, can I just use any 4” marine grade exhaust hose? Any other opinion? Mine is ripped to shreds, also need part numbers for the bellow on the u joints and lower bellow, 270 outdrive...
  2. C

    Aq125 with 270 outdrive carb and cooling questions

    i have the famous aq125, but I’m new to these engines. The boat was sitting for years and finally got it running but my problem lies with the carb and cooling system. i rebuilt the carb with a new rebuild kit and seems to be running fine, but if I cover the small hole above the idle jet on the...
  3. C

    Is this a safe transom build?

    Recently acquired a extra long shaft Honda 8 4 cycle engine. Problem is my transom is too short, was this a safe move for me to do? 1/8 aluminum on both sides between transom transom is 2-1/2 inches thick, 4 inch 5/16-18 grade 8 bolts and nuts considering mounting a block of wood in the middle...
  4. C

    15hp evinrude 2 stroke from the 80s no spark

    Where do I even start on this project? Got it from a friend and it's been sitting for years, no spark from either cylinder. What resistance readings should I be getting from what? Popped the flywheel off and it doesn't have points like I thought, just like a "pick-up" style coil and another...
  5. C

    80s mercury 9.8 trolling speed issue

    I have a 9.8, sometime from the 80s, starts awesome, idles in neutral all day, really quick off the line and holds out at WOT all day. Once I go anywhere near trolling speeds (fwd under load,low rpm) it tends to try to bog down and die, I really have to keep on the gas. Plugs are new, I'm...
Top