Search results

  1. S

    2.5L 200hp 25in to 20in

    I need to repower. I've found a 200hp black max decals say 2.5l about all I know about it.but has 25in lower found a 20in lower and want to see what it takes to swap over?
  2. S

    Mercruser carb spacer backwards?

    Took the carb off to rebuild and see the theres a spacer. Seems to be on backwards to me. Mercurser mag ski (260 hp) in a vdrive ski boat. photo is taken from stern looking twards bow.
  3. S

    8 pin wireing

    Looked for a good hour for wireing diagrams couldn't find anything. 8pin black red white blue green purple. With a beige blue stripe and guessing brown down steem
  4. S

    496 identification

    Looking for help identifying a 496 in a boat im looking to buy next week. All 496s I know are fuel injected this is carbed in a 2000 raysoncraft 21ft jetboat. Any way to tell between a regular 454
  5. S

    Force 125 wireing and rigging help

    Trying to wire in this force 125 and do throttle and cables. Have a few questions. first two photos are the engine wireing and the controls wirelead. Can I get a female plug so I can use the Male plug on controls. Seems to be a shame to cut it off and but connect everything. next is the trim...
  6. S

    Force 125 rigging

    This is my first time rigging a out board. I need to know what exact steering components I need so I can connect the duel cable steering on the boat? Also any reinforcement of the transome. I'e seen 1/8 plate also seen 4in×1/4 flat bar seeing if it's needed or common practice.
  7. S

    No spark 3&4 87 125

    So no spark on 3&4 so going threw the trouble shooting from outboard ignition. I'm tested the stator and read around 740 ohms. I dont have a peak voltage adaptor just doing resistance checks right now. I tested the trigger resistance 1 2 3 had all 50 ohms and 4 had no continuity. So question is...
  8. S

    Slow crank 87 125

    Just picked up this outboard for a song and going thew everything. The bendix was stuck up so after some lube and a few swear words got that operational. Next issue is slow crank. What I've done so far. pulled plugs and cranks faster. jumped the starter directly to bypass any wireing issues. I...
Top