Search results

  1. K

    1985 Mercury 75hp 4 cylinder

    I’m looking into buying a this mercury motor this weekend and was just curious y’all’s thoughts on it if it is a good motor and would be worth while to have on my boat for a good while. it comes with controls and in in pretty good condition. I think seller said compression is at 110-115 on all...
  2. K

    Having hard time finding part numbers

    I’m trying to find part numbers for my 1976 70hp evinrude; I’m looking for Part numbers for the poppet valves the poppet seals and thermostat and thermostat seal please,
  3. K

    1970 25hp johnson carb linkage

    I'm having a tough time figuring out how the carb linkage is supposed to go. I'm not sure if the springs are in the right spot or if something is missing. I purchased the motor a little while back and have been working on it and now I'm to the carb rebuild part of it now. When I pull the choke...
  4. K

    1970 johnson 25hp fuel pump?

    Is it possible to move the fuel pump from the lower crankcase port to the upper port, so pretty much switch the covers with each other. To me it seems like it should go on the upper part because the pump is too close to the side of the lower pan. I have a 1969 evinrude 18hp parts motor and the...
  5. K

    1954 evinreude Part

    Will a air silencer from a 1958 evinrude 7.5 fit my 1954 evinrude 7.5, I found one for really cheap online but it's from a 1958 ad-12
  6. K

    Evinrude question

    Seen this motor for sale and am thinking about buying it for 100$ seller says it's an older model evinrude 10hp motor but I was looking in the picture on the post and it looks like it says fastwin isnt the fastwin an 18 hp motor and the sportwin is the 10hp Also from the looks of it it might be...
  7. K

    Evinrude 9.9 -15 hp

    I posted another post about a motor I recently picked up for sale that was seized up and I also wasn't sure what kind of motor it was Here's a few updates I have so far on it I noticed at first the powerhead was white on it but some of it was peeling off and it was the blue metallic paint...
  8. K

    1975 Johnson 9.9 parts

    Where do I look for used parts for my motor besides Ebay and Amazon is there anyone on here that possibly sells used parts
  9. K

    1982 gamefisher 7.5 impeller

    I was planning on doing an impeller change before I take it out to the lake for the first time. Would anybody happen to have the part number I need for the impeller And also is there any other gaskets or seals that are mandatory to swap out from taking it apart, such as gaskets that might...
  10. K

    Gamefisher 7.5 carb linkage

    I just got my motor running and carb adjusted and while i had it running I noticed when I moved the throttle on the tiller handle all the way to fast it wasn't even barely accelerating. The "accelerator flap" not sure the name of it (red arrow) was barely moving a very small amount when I moved...
  11. K

    Johnson year and hp unknown

    I just bought a Johnson motor for 50$ and the I'd tag is missing.I cant tell what type of motor it is, was wandering if anyone might be able to somewhat recognize what size and year model this is possibly. The hood has no hp letters on it and is pretty worn out and has been painted
  12. K

    1982 gmaefisher 7.5 217-585750 no gas

    I'm trying to get the motor to fire up and after carb rebuild I'm not getting fuel o pulled the carb and the float bowl is bone dry . I am getting fuel to the diaphragms. I pulled the hose from the diaphragm and it had fuel coming out Is it the needle valve clogged or is some sort of passage...
  13. K

    1982 gamefisher 7.5 217-585750 flywheel

    Would anybody happen to know the ft lbs torque spec for the flywheel nut on my 7.5 gamefisher
  14. K

    1982 gmaefisher 7.5 217-585750

    What is the proper oil and oil/fuel ratio for my motor?
  15. K

    1958 evinrude 35hp questions

    I came across this motor today for sale for 100$ with the pressure tank included. It caught my attention because of the hp and I really like working on these old motors. I'm currently working on a 1955 Johnson 5.5, my first outboard to ever work on and so far everything on it as far as parts is...
  16. K

    1955 Johnson 5 1/2 water not pumping properly

    I fired up the motor I've been working on for the last few months today and it doesnt seem like its pumping water correctly, Its leaking out of the shift lever really bad. I took a video and posted it to YouTube, here is the link https://youtu.be/vpBGJU1vFvY
  17. K

    Propeller cap 1955 Johnson 5.5

    Would anyone happen to know the part number or someplace I can purchase the little rubber cone the goes on the end of the propeller? Or is there another method yall use in place of the rubber cone to keep the pin in place without the cone. I have looked online and can only find a used one on Ebay.
  18. K

    1955 Johnson 5 1/2 carburetor problem

    I finished rebuilding the carburetor on my 5.5 seahorse but the rebuild kit I bought off of Ebay only came with little cork style o ring type seals for the adjustment screws and I put them in and there's falling apart, I didn't trust using them so I took them out and tried to match them up with...
  19. K

    1955 Johnson 5 1/2 spark plugs

    Just got two brand new champion 6jc spark plugs for my motor but was wandering the recomended gap?
  20. K

    1955 Johnson 5 1/2hp head gasket

    I am getting close to 50 psi in one cylinder and a little over 60 on the other cylinder. I was wandering if I am doing the compression test correctly by pulling the starter as many times until I reach the max # psi on the gauge where it doesnt go up any farther and then stop and that is my...
Top