Search results

  1. T

    Changing H20 Pump 1973 Johnson

    so I have the new kit , and taken the lower end off . the inpeller on the new kit is smaller , and the housing is plastick I have read this is the update so my ??? is there is a metal housing in the kit that fits into the plastic housing . I asume I need to use it in all applications...
  2. T

    1973 6hp johnson

    Need to try to change the impeller on my old outboard Tired of paying the tech to do these things anyine got the manual the can email me acouple of pages from ?????
  3. T

    maiden voyage

    so after get my new boat , and bring the 1974 65 hr merc to life with a oil change , plugs, carb rebuild , h20 impellers and a good over all maint by a licenced tech .... out I go ....starts great ,,,,warms up ,, so I back off the choke ,,stalls . a few times so I leave choke on and shift into...
  4. T

    marine tech epoxy

    so I putty knife it on a few DOCk marks on my f/g boat ,, sand ,,,, now what ???? paint , wax . nothing ???? <br /><br />unsure <br /><br />jamie
  5. T

    johnson ,,year??

    I did a quick search and found no link to a page so I guess Illjust ask <br /><br />model # 6R 73S<br />serial # C 7931<br /><br />should this motor have the teltale pee stream ???<br />If yes where from ???<br />Ive been told some Johnys didnt have them ???<br />they cooled throught the...
  6. T

    merc question

    just got a 74 merc 3 cyl 65 horse<br />hasnt been running in years , changed leg oil and gave it a go , started almost right away <br /><br />1# started with 2 pee streams >>> ran for a while and restarted , one pee is way less now ????<br /><br />2# After shut off gas runs from the carbs ???<br...
  7. T

    older merc question

    just got a 74 merc 3 cyl 65 horse<br />hasnt been running in years , changed leg oil and gave it a go , started almost right away <br /><br />1# started with 2 pee streams >>> ran for a while and restarted , one pee is way less now ????<br /><br />2# After shut off gas runs from the carbs...
  8. T

    link needed

    to a serial number breakdown for an old merc <br /><br />I did a seach and found very little <br /><br />the # is 7030315
  9. T

    has not been running in 10 yrs

    merc 55 I think its a 74 , I can post a pic . SO it hasnt been started in 10 years , Safest way to get her going .. also was rebuilt(top end ) here at the dealer a few trips before the shut down <br /><br />thanks
  10. T

    OLYMPIC boats

    any one have one or ever ride in one I have a chance to buy one at a good price ,,17 ft Olympic ??????
  11. T

    transom install

    been busy on the project , So I decided to fix her with layers of A grade plywood . So do I install them 1 at a time with glass between the wood and finnished with 2 layers off mat ?? Or can I screw the 3 boards together and install as an assembly ????<br /><br />BTW <br /><br />I have covered...
  12. T

    removing rub strip , older double eagle??

    Doing the transom on my 16 ft Double Eagle . all the reading I have read says simply pull out rub strip ... This seems impossibe . Is the strip just rusted in or do I have to remove inner bolst before the strip ????<br /><br />hope this makes sence
  13. T

    Bypassing kill switch ???

    I am looking to bypass the kill switch on my 84 50hrs johnson ...opened the controls and found three wires to the switch black = ground , purple and grey .. is this as simple as attatching the purple and grey ?????? <br /><br />BTW the isue I have is the motor will run great when the kill switch...
  14. T

    Bypassing kill switch ???

    I am looking to bypass the kill switch on my 84 50hrs johnson ...opened the controls and found three wires to the switch black = ground , purple and grey .. is this as simple as attatching the purple and grey ?????? <br /><br />BTW the isue I have is the motor will run great when the kill switch...
  15. T

    84 johnon 50hp , lower end

    looking to change the bottom end seals in my johnson, prop is off , removed two 8 mil bolts from down inside , Do I have to thread out the assy or is it a press in and out ?? There are threads in the housing so I asume it threads out . Should I try heat ? AM I missing a bolt or two ...
  16. T

    transom

    so my transome has a few soft spots in it and I need to get going of a fix , ????? am I in over my head ?? ANy good sites or books I should read ?? Does the top of the hull come off ???? <br />BTW I have a 16 ft double eagle <br /><br />any help or advice would be great <br /><br />JAmie...
  17. T

    84 johnson 50horse no idle

    so I have a project here and am very close to launch ,,,,, but my motor wont idle . It runs well if I hold down this small button on the side of the control but as soon as I release it it stalls ..... any ideas <br /><br /><br />newbi jamiesather@shaw.ca
  18. T

    What is this

    Just bought a 16 ft double eagle , any ideas on what the plug may be ... its locateds in the back of the boat like where the gas and battery might go .. is it gas .. any ideas would help <br /><br />thanks in advance <br />Jamie<br /><br />...
  19. T

    my new boat

    Ok ,, New guy here , My name is Jamie and I live in Victoria ... New to the fiberglass boat thing , just got a steal of a deal on a 16 ft double eagle ... So I was cleaning her up ( shes been sitting a while ] and I find a brass plug in the rear of the boat that screws out it seems to go to the...
Top