Search results

  1. Nick_1987 5.7 OMC

    5.7 omc stalling while shifting

    Ok sounds like a plan
  2. Nick_1987 5.7 OMC

    5.7 omc stalling while shifting

    My timing before I even adjusted it was way off, I think it was under 4 or even 2.
  3. Nick_1987 5.7 OMC

    5.7 omc stalling while shifting

    Well I retarted the distributed a bit and the sound has disappeared. No more weird noises and no more loss of RPM. I think it dropped from 8* to 6*. New prop is arriving tmr and will test it. I will let you guys know the Rpm’s
  4. Nick_1987 5.7 OMC

    5.7 omc stalling while shifting

    So what else could it be?
  5. Nick_1987 5.7 OMC

    5.7 omc stalling while shifting

    so this noise never came until I changed the timing so probably where it’s coming from. So I will drop it to 6. Also! Can this cause the rpm drop aswell?
  6. Nick_1987 5.7 OMC

    5.7 omc stalling while shifting

    What s What should I do when I head to the boat later this afternoon? Adjust something? Maybe retard the Distributer abit because I’m running 87 oct
  7. Nick_1987 5.7 OMC

    5.7 omc stalling while shifting

    I touched the block and manifold and I didn’t feel no tapping, usually you should. Sounded more from the back of the motor close to outdrive. I have no idea. That’s what I’m asking you guys
  8. Nick_1987 5.7 OMC

    5.7 omc stalling while shifting

    Engine temp is staying between 160 and 175. I have a feeling it’s a bearing on one of the belts. What do you think is causing that rattle? It has nothing to do with rpm. There’s no coralation. It happens at 3500rpm once I back off it’s gone.
  9. Nick_1987 5.7 OMC

    5.7 omc stalling while shifting

    Here is a video
  10. Nick_1987 5.7 OMC

    5.7 omc stalling while shifting

    Ok boyzzz we got we going good. Checked dwell, in between 27 and 31. Timing is set to 8* BTDC and idle is between 500-600. I was able to dock nice and easy but after 4 shifts it stalled on me. Luckily I was already in the skills I trhink maybe idle is a tad to low. Anyways, here’s another issue...
  11. Nick_1987 5.7 OMC

    5.7 omc stalling while shifting

    Ok what’s prop should I try?
  12. Nick_1987 5.7 OMC

    5.7 omc stalling while shifting

    Ok will be headed to the boat shortly ok I will usually run with half tank had and 1-3 guys. What prop should I test ?
  13. Nick_1987 5.7 OMC

    5.7 omc stalling while shifting

    So with my timing light I will line the flash up with the 8 BTDC ? I usually run on 87 Oct gas.
  14. Nick_1987 5.7 OMC

    5.7 omc stalling while shifting

    oh you mean that little bit that is screwed into the welded 90. i never checked that.
  15. Nick_1987 5.7 OMC

    5.7 omc stalling while shifting

    Is there a difference between a timing light and a advance timing light ?
  16. Nick_1987 5.7 OMC

    5.7 omc stalling while shifting

    In my case is all welded on, I can’t open anything to check. Unless there’s a different way
  17. Nick_1987 5.7 OMC

    5.7 omc stalling while shifting

    Where the hose clamps on to the barbed 90 ?
  18. Nick_1987 5.7 OMC

    5.7 omc stalling while shifting

    It’s 5000lb dry. I think that’s without motor, drive and all the stuff I have inside.
  19. Nick_1987 5.7 OMC

    5.7 omc stalling while shifting

    Where is this valve located? My bayliner is roughly 28-29FOA including swim platform and anchor nose. And 10 foot beam.
  20. Nick_1987 5.7 OMC

    5.7 omc stalling while shifting

    How about my prop situation?
Top