Search results

  1. cyauch

    Power Steering Leak @ Actuator

    Been a while. But to update, PS leak resolved. Kept going back and forth to send off to rebuild or just buy new. After a week of back and forth noticed on the Bay an actuator was posted....and to my surprise, the seller was 5 miles away from me! Stopped by the following day, inspected and...
  2. cyauch

    Power Steering Leak @ Actuator

    yea, i wish i had read that before i added. but i do think the leak was before i added. i thought it was low from engine removal over winter. i think i checked PS before trials, but i dunno. i do know it wasnt leaking at all last year. so im sure i screwed something up or its just Murphy...
  3. cyauch

    Power Steering Leak @ Actuator

    Yep, got a fluid leak at the actuator. But i have a fluid question as i'm completely confused on the fluid to use, and if that's actually the root cause here. No leaks at all last year. Removed engine to replace transom seal over winter. First trials last week noticed PS pump noise. Fluid...
  4. cyauch

    Riser To Manifold Torque w/Sierra gasket

    but i now have a power steering leak that appears to be near the transom. at least it looks like its running down from there. two hoses on left side of ram are dry so i dunno. pump has obvious foaming and noise progressed as run went on. bilge around pump and hose that runs under engine showed...
  5. cyauch

    Riser To Manifold Torque w/Sierra gasket

    another round if seal trials done. pop in arrestor never reared its ugly head. maybe a little trapped air is all it was. run today was an hour long up the river and back to launch. no leaks at riser....for now. and engine temps seemed good. keep in mind my rpm gauge doesnt work ( another...
  6. cyauch

    Riser To Manifold Torque w/Sierra gasket

    thanks! for now, i only did the port riser but did check torque on stbd. it was good. as for the port riser, i did set a metal ruler. couldnt find my feeler gauges (and of course the kids and wife have sudden and selective amnesia) so by eyeball it 'looked' ok; no major gaps visible. but...
  7. cyauch

    Riser To Manifold Torque w/Sierra gasket

    thanks guys. yea, im assuming 15 years. its a 15 year 1 prior owner boat i bought last year out if Louisanna south of new orleans. they told me previous owner moved from south carolina and never saw salt, so traded for a center console. i took that with a grain of salt (pun intended). ive...
  8. cyauch

    Riser To Manifold Torque w/Sierra gasket

    enginesilo: well, i wish i read ur post before i took the port riser off. lol. but the suspense was killing me on what these things look like in the water passages. prior to pulling though i did hit heads with a torque wrench. all 4 turned at least a quarter turn before i got a click...
  9. cyauch

    Riser To Manifold Torque w/Sierra gasket

    as always, thanks! you've more than helpful and i appreciate the guidance and info
  10. cyauch

    Riser To Manifold Torque w/Sierra gasket

    yep. thats what they look like
  11. cyauch

    Riser To Manifold Torque w/Sierra gasket

    I seriously hate having to ask this. Spent the better part of a day and a half trying to find an answer that wasn't immediately contradicted by someone else....who doesn't own, nor ever owned, an I/O :) . I also feel I'm starting to believe this place is becoming my second home too.....which...
  12. cyauch

    Another Overheating Issue @ Idle

    Got it. just responded
  13. cyauch

    Another Overheating Issue @ Idle

    Yea, but Murphy is my brother :-) I hate to ask in this thread since this is Riser related now, is this a valid part number for the gaskets? MarinePartsEurope says for the GXI-E the part number is 3863191 but it also says the gasket is out of production?
  14. cyauch

    Another Overheating Issue @ Idle

    thanks guys. The impeller i took a pic of i bought from a boat dealer locally. Had to give them the engine serial number and i probably should have checked the number that was stamped on it. But....Good news!! (and some not so good, but not really bad i guess) First, it appears my...
  15. cyauch

    Another Overheating Issue @ Idle

    Doing some research on a sea water pump i just noticed something odd. The pic i attached of the impeller shows a PN of 21213650. Yet, i can't find that part anywhere. Everything comes up as 21213660. I got this impeller last fall from a dealer in Alabama and provided the engine serial...
  16. cyauch

    Right Exhaust Seal Part Number?

    Was gonna pull lower unit to investigate another issue i'm having. Ordering orings, gaskets, etc. and came across one i can't find anywhere. Cecil Marine says special order item, but looking on other sites Belarus comes up as the only location who seems to have it....maybe, Part number is...
  17. cyauch

    Another Overheating Issue @ Idle

    Thanks. Putting order together tonight for this and some gaskets that I'll need for other things i'll be checking the next couple of days. Upon close inspection of the pump assembly, i noticed the wear patter in the outer housing is kinda 'sloped' if that makes sense? Think of an auto tire...
  18. cyauch

    Another Overheating Issue @ Idle

    one more pic. just noticed the impeller has been scrubbing the housing.
  19. cyauch

    Another Overheating Issue @ Idle

    kinda sorta i think? :) im still learning about I/O's so... what i did was insert 1" pvc pipe into suction hose disconnected at the RWP. see post #12 of this thread. i have pic there. then turned hose on and let that run a few minutes. occasionally i would cycle the valve to give a little...
  20. cyauch

    Another Overheating Issue @ Idle

    thanks AD. was able to drop her in this afternoon because i really wanted to confirm if i could touch the risers or tstat housing or not without pain. the answer is yes...and no. so again sitting on trailer in water, backend floating. idled for 30 mins. tstat opened. housing read 143 - 155...
Top