Search results

  1. G

    How to remove fuel pickup tube

    Okay thanks for the information. That really helps
  2. G

    How to remove fuel pickup tube

    That’s what I’m trying to figure out. I’ve never seen the inside of tank. I feel like maybe the top nut is used to sandwich the fitting that the fuel pickup tube screws into. This is the first and only boat I’ve ever worked on.
  3. G

    How to remove fuel pickup tube

    Just the hole for the fuel gauge sending unit.
  4. G

    How to remove fuel pickup tube

    Is there another fitting inside the tank? I can completely back off the large nut from that aluminum fitting and it still is tight on the tank.
  5. G

    How to remove fuel pickup tube

    There was another brass fitting that the hose connected to. It took it off to get better access
  6. G

    How to remove fuel pickup tube

    I am trying to remove fuel pickup tube. Does the fitting just unscrew? I can rotate the large nut. When I turn the fitting, holding the large nut, it rotates but doesn’t seem to be unscrewing. I actually unscrewed the large nut all the way off the fitting and then tried unscrewing the fitting...
  7. G

    will not engage forward with engine running on baffles

    yes it will go into reverse. When I try to engage forward, there is a clicking sound like it is trying to engage. I'm going to drop the lower unit and re-align the shafts. If that doesn't work I'm thinking lower cable. If I had to guess it is probably the original cable. Thanks for all your...
  8. G

    will not engage forward with engine running on baffles

    so when you lift the lower unit up to the upper unit is it an all-or-nothing situation, it either is aligned or not aligned? I still don't understand why the engine running has anything to do with forward gear engaging, It will engage with the engine not running but will not when the engine is...
  9. G

    will not engage forward with engine running on baffles

    I did not pull the entire drive
  10. G

    will not engage forward with engine running on baffles

    Correct, I did pull the drive just lowered the bottom unit to access the impeller
  11. G

    will not engage forward with engine running on baffles

    I did separate the lower and upper units. I know that I did put it in drive before dropping the lower unit. Is it possible to disengage the unit while assembling the lower and upper units?
  12. G

    will not engage forward with engine running on baffles

    I have a 1982 mercruiser 140. With the engine running on the trailer, it will not engage in forward. It will engage with the engine off. I took off the lower cable and it moved freely and will engage both forward and reverse with the engine off. I have not had the boat very long and have only...
  13. G

    1983 thundercraft live well pump?

    So what is the difference between anchor lights and navigation lights? The label above the switch says "nav/anchor". But if you are correct about those switches being non-original, who knows what the original set up was like. Thanks for your input. So right now I have a switch that turns on the...
  14. G

    1983 thundercraft live well pump?

    That makes sense. Any thoughts on the two pump switches?
  15. G

    1983 thundercraft live well pump?

    I just got a 1983 thundercraft with a mercruiser 140. Under one of the seats at the bow there is a tank that looks like a live well. When I pour water in it the water just drains out of the side of the boat through a drain hole. Is this a live well? There is a switch on the dash that is marked...
Top