Search results

  1. J

    1970 aqua loop

    Awesome ty. I'll look into that group.
  2. J

    1970 aqua loop

    So I'm possibly getting a 1970 aqua loop. I've searched for parts for it and can't find anything. Anyone know where to find parts for one of these? If I can't find parts then I think I'll just pass on getting it.
  3. J

    1958 evinrude lark 35 hp 35514 water pump

    @racerone ah ok. ty again guys. ill check that out tomorrow.
  4. J

    1958 evinrude lark 35 hp 35514 water pump

    Sorry but how do I test the thermostat and find where it is?
  5. J

    1958 evinrude lark 35 hp 35514 water pump

    Ty. That is what it is looking like. There was a type of ring on top of the housing that still looked fine. The housing as well looked fine. The impeller had all but 2 fine broken off so that definitely needs replacing. The metal plate below the impeller needs to be cleaned up but also looks fine.
  6. J

    1958 evinrude lark 35 hp 35514 water pump

    Yea I have been working on the rest of the motor. Had a friend check it out and he said it had good compression and spark. I've already rebuilt the carb and fuel pump as well as a new starter motor. Got the lower unit off and the housing looks good so wont nee to get that. Thanks for the help.
  7. J

    1958 evinrude lark 35 hp 35514 water pump

    Guessing this is the linkage I was missing. Sorry I'm new to working on motors so this is all a learning experience for me.
  8. J

    1958 evinrude lark 35 hp 35514 water pump

    Yep found it :). Still doesnt want to slide out but does move freely now. I've watched a few videos on newer motors and they have a linkage they have to disconnect. Is there something like that that I'm missing or do I just need to give it a good yank?
  9. J

    1958 evinrude lark 35 hp 35514 water pump

    Ah looking in the little port on the bottom I can see it does have 2 tubes running to the pump.
  10. J

    1958 evinrude lark 35 hp 35514 water pump

    Ty. I am trying to take it apart now. Cant seem to get the lower unit off. This motor hasn't been ran in 12 to 15 years. Took out the 6 bolts holding it on and from what I see and the diagram I'm going off of the unit should then just slide out. The front part of the lower unit separates but the...
  11. J

    1958 evinrude lark 35 hp 35514 water pump

    I have no clue as I haven't pulled it apart yet. Here is a pic of the motor serial number and motor.
  12. J

    1958 evinrude lark 35 hp 35514 water pump

    Ah ty very much. I'll pull it all off and make sure that impeller housing matches mine. Those numbers definitely helped.
  13. J

    1958 evinrude lark 35 hp 35514 water pump

    could anyone tell me which full water pump kit i need for a 35514 evinrude 35 hp lark motor? i cant seem to find the part numbers for what i need. all the kits i keep seeing say its for like 1985-.
  14. J

    starter motor help

    ok. happen to know any model numbers that would work? im just worried about getting the wrong one and then my mounting bracket not fitting on the starter.
  15. J

    starter motor help

    ah ok. did not know that. nice to know i have quite a few options for starters now. do you happen to know if there any difference in the d6 and d4 versions of that starter?
  16. J

    starter motor help

    so i found one with my same model number. would it matter if mine is the mgd-4007 d4 and his is the mgd-4007 d6?
  17. J

    starter motor help

    So i took my starter motor apart and found it is completely rusted on the inside. wires were rusted away. everything in the bottom of the starter is rusted away so pretty much its done for. i am looking at buying a new one but having a hard time finding one. my motor is the 35514 1958 evinrude...
  18. J

    Evinrude 35514 broken choke solenoid

    Ty I found one on ebay for $60
  19. J

    Evinrude 35514 broken choke solenoid

    Well I tried to solder it back on but there just isnt enough room or enough of an area to make the solder truly hold with the equipment I have. Guess I'll just try to go buy a another.
  20. J

    Evinrude 35514 broken choke solenoid

    So I was pulling the carburetor off to rebuild it and the power prong for the choke solenoid broke off when trying to get the bolt off. Guessing there isnt any way to fix this? Gotta get a new solenoid right?
Top