Search results

  1. hammyloz

    mixture screws

    could someone tell me in laymans terms where the idle mixture screws on my carbs are as my manual says where they are but they are not there 1982 blueband inline 6 thanks
  2. hammyloz

    fuel pump kit

    how easy is it to change the fuel pump kit and a step by step if possible
  3. hammyloz

    seafoam

    here in england what is the equivalent to seafoam non of the shops i been to have heard of seafoam so all these threads saying use seafoam is there anyone in the know what we call it
  4. hammyloz

    carb tester

    just got myself a carb tester off ebay with no instructions as a completet noob where do i plug the tubes into and what sort of readings should i get (if good) mercury blueband 115hp 1982 inline 6
  5. hammyloz

    spark plug colour

    just a web page for the moderators to put in the right place tells you what colour(color) your plugs should be http://www.dansmc.com/Spark_Plugs/Spark_Plugs_catalog.html
  6. hammyloz

    flooring question

    i want to replace my floor and have read about fibre glassing the floor to the hull question 1: do i fibreglass just the ends of the ply to the hull or do i glass the whole floor its an 18ft fletcher arrow fibregalss hull thanks in advance
  7. hammyloz

    symptoms

    could one of you very knowledgebale people out there give me the symptoms if the main nut(the one that holds it to the block itself) of a carb (one of 3 carbs) wasnt tightened properly now to put it in laymans terms there are 3 carbs with 2 nuts holding each carb to the engine i tightened them...
  8. hammyloz

    carbs off

    1982 mercury 115 I6 right here we go i had a problem with fuel peeing out the top screw in the carb you guys diagnosed as sticky float, i took carbs off and the one that was doing the peeing i found the spring wasnt in the hole on the float question 1- would this have been the cause of it...
  9. hammyloz

    idle tooooo high

    i have a 1982 blueband merc s/n 06093940 it idles way to high and crunches into gear when looking at carbs on the right hand side is a thing that you can turn my question is is this the idle screw
  10. hammyloz

    Q for clams bendix drive

    thanks to you guys my 1982 blueband is sweeeeet went out today and the cog on the starter motor has worn down so much it dont connect to the flywheel(ever tried using a pull cord on a 115hp) been trying to get one from uk stores with no luck usa stores want 30 bucks for delivery i dont suppose...
  11. hammyloz

    steering stiff

    hi all i have a mid steer 18ft fletcher arrow mid 70s build 2 questions 1: the steering cable is too long would this be the cause of it being really hard to steer even at WOT and can i cut it down dont know what steering it is but is about an inch 1/2 thick 2: has anyone seen a mid steer...
  12. hammyloz

    is this an 81

    i been told my engine is a 1981 does anyone know if this is correct 115hp mercury blueband s/n 06093940 anyhelp will be good, thanks in advance
  13. hammyloz

    please help summer is here

    i went out on saturday all was fine went out sunday and all of a sudden cough cough splut, i was 3 miles out and from a screw in the top carb the fuel was coming out as much as water does from the tell tale, it did sort itself out and engine was fine so i nursed her back to pontoon, spray carb...
  14. hammyloz

    please help grp seats

    hi<br />i have a grp 12ft speedboat but am totally puzzled on how i install seats<br />im sure i dont just put bolts through the bottom of the hull<br />please please please help(my first post)
Top